NORMSERVIS s.r.o.

ČSN ETSI EN 301489-5-V2.3.1 (875101)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard for ElectroMagnetic Compatibility

STANDARD published on 1.12.2025

English -
Print design (16.90 USD)

The information about the standard:

Designation standards: ČSN ETSI EN 301489-5-V2.3.1
Classification mark: 875101
Catalog number: 522295
Publication date standards: 1.12.2025
The number of pages: 32
Approximate weight : 96 g (0.21 lbs)
Country: Czech technical standard
Category: Technical standards ČSN

Annotation of standard text ČSN ETSI EN 301489-5-V2.3.1 (875101):

V2.3.1
The present document specifies the applicable test conditions, performance assessment and performance criteria technical characteristics, test methods and methods of measurement for the assessment of Private land Mobile Radio (PMR) and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC).
The present document covers both analogue and digital Private land Mobile Radio (PMR) equipment as well as Terrestrial Trunked Radio (TETRA).
Technical specifications related to the antenna port and emissions from the enclosure port of the equipment are outside of the scope of the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum, see Table 1.
Emissions requirements in the present document are specified for frequencies above 9 kHz.
NOTE 1 - The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] is given in annex A.
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio equipment are not included in the present document.
NOTE 2 - Such technical specifications are normally found in the relevant product family standards for AC mains powered equipment (e.g. EN 61000-3-2 [i.12] and EN 61000-3-3 [i.13]).
The environmental classification as per ETSI EN 301 489-1 [1] applies