NORMSERVIS s.r.o.

ČSN ETSI EN 301842-5-V2.1.1 (875110)

VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

STANDARD published on 1.3.2017

English -
Print design (14.80 USD)

The information about the standard:

Designation standards: ČSN ETSI EN 301842-5-V2.1.1
Classification mark: 875110
Catalog number: 501390
Publication date standards: 1.3.2017
The number of pages: 24
Approximate weight : 72 g (0.16 lbs)
Country: Czech technical standard
Category: Technical standards ČSN

Annotation of standard text ČSN ETSI EN 301842-5-V2.1.1 (875110):

V2.1.1 The present document applies to Very High Frequency (VHF) Digital Link (VDL) Mode 4 ground-based radio transmitters and receivers for air ground communications operating in the VHF band, using Gaussian-filtered Frequency Shift Keying (GFSK) Modulation with 25 kHz channel spacing and capable of tuning to any of the 25 kHz channels from 112,000 MHz to 136,975 MHz as defined in ICAO VHF Digital Link (VDL) Standards and Recommended Practices (SARPs) [i.5]. Manufacturers should note that in future the tuning range for the ground transceivers may also cover any 25 kHz channel from 108,000 MHz to 111,975 MHz. The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.2]. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the Directive 2014/53/EU [i.2] as well as essential requirements under the Single European Sky Interoperability Regulation 552/2004 [i.10] and related implementing rules and/or essential requirements under the EASA basic regulation No 216/2008 [i.3] as amended by Regulation No 1108/2009 [i.4] may apply to equipment within the scope of the present document