Standard IEC 60317-20-ed.3.1 12.6.2019 preview

IEC 60317-20-ed.3.1

Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155

Translate name

STANDARD published on 12.6.2019


AvailabilitySold out
PriceON REQUEST excl. VAT
ON REQUEST

The information about the standard:

Designation standards: IEC 60317-20-ed.3.1
Publication date standards: 12.6.2019
SKU: NS-951399
The number of pages: 40
Approximate weight : 120 g (0.26 lbs)
Country: International technical standard

The category - similar standards:

Wires

Annotation of standard text IEC 60317-20-ed.3.1 :

IEC 60317-20:2013+A1:2019 specifies the requirements of solderable enamelled round copper winding wire of class 155 with a sole coating based on polyurethane resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements.NOTE: A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is:- Grade 1: 0,018 mm up to and including 0,800 mm;- Grade 2: 0,020 mm up to and including 0,800 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013. This third edition cancels and replaces the second edition published in 1990, Amendment 1:1997 and Amendment 2:1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:- new 3.2.2 containing general notes on winding wire, formerly a part of the scope;- revision to references to IEC 60317-0-1:2013 to clarify that their application is normative;- modification to Clause 15 to remove specific wire specimen sizes;- consolidation of 17.1 and 17.2 of the solderability requirements;- modification to Clause 19, Dielectric dissipation factor;- new Clause 23, Pin hole test.This consolidated version consists of the third edition (2013) and its amendment 1 (2019). Therefore, no need to order amendment in addition to this publication.Key words: requirements of solderable enamelled round copper winding wire, class 155, sole coating based on polyurethane resin LIEC 60317-20:2013 specifie les exigences pour les fils de bobinage brasables de section circulaire en cuivre emaille de classe 155 avec un revetement unique a base de resine polyurethanne, qui peut etre modifiee sous reserve de conserver lidentite chimique de la resine initiale et de repondre a toutes les exigences specifiees pour le fil.NOTE - Une resine modifiee est une resine qui a subi une modification chimique, ou qui contient un ou plusieurs additifs pour ameliorer les resultats obtenus ou les caracteristiques dutilisation. La gamme des diametres nominaux des conducteurs couverte par la presente norme est:- Grade 1: 0,018 mm jusqua 0,800 mm compris;- Grade 2: 0,020 mm jusqua 0,800 mm compris Les diametres nominaux des conducteurs sont specifies dans lArticle 4 de lIEC 60317-0-1:2013. Cette troisieme edition annule et remplace la deuxieme edition parue en 1990, lAmendement 1:1997 et lAmendement 2:1999. Cette edition constitue une revision technique. Cette edition inclut les modifications techniques majeures suivantes par rapport a ledition precedente:- un nouveau 3.2.2 contenant des notes generales sur le fil de bobinage integrees auparavant au domaine dapplication;- la revision des references a lIEC 60317-0-1:2013 pour bien etablir que leur application est normative;- la modification de lArticle 15 pour retirer les tailles deprouvettes de fils specifiques;- la consolidation de 17.1 et 17.2 des exigences relatives a la brasabilite;- la modification de lArticle 19, Facteur de dissipation dielectrique;- un nouvel Article 23, Detection des microfissures en immersion.Cette version consolidee comprend la troisieme edition (2013) et son amendement 1 (2019). Il nest donc pas necessaire de commander lamendement avec cette publication.Mots-cles: exigences pour les fils de bobinage brasables de section circulaire en cuivre emaille, classe 155, revetement unique a base de resine polyurethanne

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.




Cookies Cookies

We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.

You can refuse consent here.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.