Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Determination of bending/shear strength by the three-point method.

Standard published on 31.7.2014

Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Determination of flexural strength by the four-point method.

Standard published on 31.7.2014

Carbonaceous materials for the production of aluminium. Anodes, cathodes blocks, sidewall blocks and baked ramming pastes. Determination of the thermal conductivity using a comparative method.

Standard published on 30.3.2005

Carbonaceous materials used in the production of aluminium. Baked anodes. Determination of the reactivity to carbon dioxide. Thermogravimetric method.

Standard published on 1.12.2004

Carbonaceous materials used in the production of aluminium. Baked anodes and sidewall blocks. Determination of the reactivity to air. Thermogravimetric method.

Standard published on 29.3.2005

Mechanical vibration and shock. Vibration isolation of Machines. Information for the application of source isolation.

Standard published on 30.4.2009

Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles.

Standard published on 31.12.2012

Plastics. Vertical flame spread determination for film and sheet.

Standard published on 31.3.2017

Electrodeposited nickel plus chromium coatings for automobile plastic parts — Specification and test requirements.

Standard published on 13.11.2025

Mechanical joining. Destructive testing of joints. Specimen dimensions and test procedure for tensile shear testing of single joints.

Standard published on 31.7.2013