Standards BS - British national standards - Page 431

Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers.

Standard published on 31.5.2012

Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements and test methods.

Standard published on 2.5.2023

Resilient floor coverings. Specification for corkment underlay.

Standard published on 15.12.1999

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction).

Standard published on 15.10.2002

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction).

Standard published on 15.10.2002

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (without or with size reduction).

Standard published on 15.10.2002

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction).

Standard published on 15.10.2002

Surface active agents. Determination of stability in hard water.

Standard published on 15.6.1999

Adhesives. Determination of ash and sulfated ash.

Standard published on 15.7.1998

Wood-based panels. Determination of formaldehyde release. Small-scale chamber method.

Standard published on 4.3.2025