Standards BS - British national standards - Page 6602

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8).

WITHDRAWN published on 31.8.1971

Aluminum-copper-magnesium alloy wires for solid, cold forged rivets (not exceeding 3/8 inch diameter).

WITHDRAWN published on 1.1.1967

Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8).

WITHDRAWN published on 31.8.1971

Specification for aluminium-alloy-coated sheet and strip of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15).

WITHDRAWN published on 31.8.1971

Specification for ingots and castings of aluminium-copper alloy (165 MN/m² 0.2 per cent proof stress) (Cu 4.5).

WITHDRAWN published on 30.6.1981

Specification for ingots and castings of aluminium-copper alloy (200 MN/m² 0.2 per cent proof stress) (Cu 4.5).

WITHDRAWN published on 30.6.1981

Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6).

WITHDRAWN published on 31.8.1971

Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6).

WITHDRAWN published on 31.8.1971

Aircraft tyres and rims. Specification for new tyres, retreads and rims.

WITHDRAWN published on 31.12.1986

Aircraft tyres and rims. Methods of test for tyres.

WITHDRAWN published on 31.12.1986