Standards ČSN - Czech national standards - Page 1331

Test conditions for machine centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)

Standard published on 1.6.2005

Test conditions for machine centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes

Standard published on 1.6.2005

Test conditions for machine centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets

Standard published on 1.6.2005

Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations

Standard published on 1.1.2020

Test conditions for machining centres - Part 7: Accuracy of finished test pieces

Standard published on 1.4.2021

Test conditions for machining centres - Part 8: Evaluation of contouring performance in the three coordinate planes

Standard published on 1.6.2005

Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change

Standard published on 1.7.2005

Test conditions for machining centres - Part 10: Evaluation of thermal distortions

Standard published on 1.11.2024

Podmínky zkoušek obráběcích center - Část 1: Zkoušky geometrické přesnosti strojů s vodorovnou osou vřetena a s hlavami jako příslušenství (vodorovná osa Z) (Norma k přímému použití jako ČSN).

WITHDRAWN published on 1.5.2002

Test conditions for machine centres - Part 1: Geometric tests for machines with horizontál spindle and with accessory heads (horizontal Z-axis)

WITHDRAWN published on 1.6.2005