Standards ČSN - Czech national standards - Page 2174

Aerospace series - Steel 31Ni10 - 1 230 MPa <= Rm <= 1 420 MPa - Forgings - De <= 40 mm

WITHDRAWN published on 1.6.2020

Aerospace series - Steel 30CrNiMo8 (1.6580) - 1 100 MPa <= Rm <= 1 300 MPa - Forgings - De <= 100 mm

Standard published on 1.6.2020

Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa <= Rm <= 1 080 MPa - Bars

Standard published on 1.6.2020

Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa <= Rm <= 1 080 MPa - Forgings - De <= 150 mm

Standard published on 1.6.2020

Aerospace series - Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) - As cast - Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock

Standard published on 1.6.2020

Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed and precipitation hardened - 1 400 <= Rm <= 1 550 MPa - Forgings - De <= 100 mm

Standard published on 1.6.2020

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 <= Rm <= 750 MPa - Tubes for structures - 0,5 <= a <= 5 mm

Standard published on 1.6.2020

Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa <= Rm <= 1 200 MPa - Bars - 100 mm <= D <= 250 mm

Standard published on 1.7.2023

Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealed - Sheet and strip - 0,3 mm <= a <= 2 mm - For prevailing torque nuts

Standard published on 1.2.2010

Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm <= a <= 6 mm - 1 080 MPa <= Rm <= 1 280 MPa

Standard published on 1.6.2024