Standards ČSN - Czech national standards - Page 552

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application

Standard published on 1.9.2017

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

Standard published on 1.1.2026

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of water soluble contaminants for analysis (Bresle method)

Standard published on 1.12.2020

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts

Standard published on 1.5.2021

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate

Standard published on 1.12.2006

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid extraction

Standard published on 1.7.2025

Preparation of steel substrates before application of paints and related products. Tests for the assmessment of surface cleanlines. Part 1: Field test for soluble iron corrosion products

WITHDRAWN published on 1.6.1996

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces

WITHDRAWN published on 1.6.2006

Preparation of steel substrates before application of paints and related products. Tests for the assmessment of surface cleanlines. Part 2: Laboratory determination of chloride on cleaned surface

WITHDRAWN published on 1.7.1996

Preparation of steel substrates before application of paints and related products. Test for the assessment of surfacre cleanliness. Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)

WITHDRAWN published on 1.7.1996