We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
DIN is a protected designation of German national technical standards.
Plain Workshop and Inspection Gauges; Manufacturing Tolerances and Permissible Wear.
(Arbeits- und Prüflehren für Längenmaße; Herstelltoleranzen und zulässige Abnutzung.)
WITHDRAWN published on 1.12.1965
Selected format:
Workshop Gap Gauges and Check Gauges for ISO Fit Sizes from 1 to 500 mm Nominal Dimension; Gauge Dimensions and Manufacturing Tolerances.
(Arbeitsrachenlehren und Prüflehren für ISO-Paßmaße von 1 bis 500 mm Nennmaß; Lehrenmaße und Herstelltoleranzen.)
WITHDRAWN published on 1.8.1966
Selected format:
Geometrical product specifications (GPS) - Working gauges for external dimensions with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 and nominal dimensions of 1 mm to 500 mm and associated acceptance gauges - Gauge dimensions and tolerances.
(Geometrische Produktspezifikation (GPS) - Arbeitslehren für Außenmaße mit Toleranzklasse nach DIN EN ISO 286-1 und DIN EN ISO 286-2 von 1 mm bis 500 mm Nennmaß und zugehörige Prüflehren - Lehrenmaße und Toleranzen.)
WITHDRAWN published on 1.10.2012
Selected format:
Workshop Plug Gauges and Spherical End Measuring Rods for ISO Fit Dimensions from 1 to 500 mm Nominal Dimensions; Gauge Dimensions and Manufacturing Tolerances.
(Arbeitslehrdorne und Kugelendmaße für ISO-Paßmaße von 1 bis 500 mm Nennmaß; Lehrenmaße und Herstelltoleranzen.)
WITHDRAWN published on 1.8.1966
Selected format:
Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges.
(Geometrische Produktspezifikation (GPS) - Arbeitslehrdorne und Stichmaße mit kugelförmigen Endflächen für Innenmaße mit Toleranzklasse nach DIN EN ISO 286-1 und DIN EN ISO 286-2 von 1 mm bis 500 mm Nennmaß - Lehrenmaße und Toleranzen.)
WITHDRAWN published on 1.3.2014
Selected format:
DIN- and ISA-fits for the hole basic system.
(DIN- und ISA- Passungen - Gesamtübersicht - Einheitsbohrung, Nennabmaße.)
WITHDRAWN published on 1.12.1936
Selected format:
DIN- and ISA-fits for the unit wave system - Nominal dimensions.
(DIN- und ISA- Passungen - Gesamtübersicht - Einheitswelle - Nennabmaße.)
WITHDRAWN published on 1.12.1936
Selected format:
Geometrical tolerancing; - Envelope principle without drawing indication.
(Maß-, Form- und Lagetolerierung; - Hüllbedingung ohne Zeichnungseintragung.)
WITHDRAWN published on 1.3.1985
Selected format:
Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing.
(Zusammenhang zwischen Maß-, Form- und Parallelitätstoleranzen; Hüllbedingung ohne Zeichnungseintragung.)
WITHDRAWN published on 1.1.1987
Selected format:
Deviations for dimensions without indication of tolerances.
(Zulässige Abweichungen für Maße ohne Toleranzangabe - Abweichungen für Längenmaße, Rundungshalbmesser und Schrägungen, Winkelmaße.)
WITHDRAWN published on 1.8.1970
Selected format:Latest update: 2024-05-17 (Number of items: 2 902 148)
© Copyright 2024 NORMSERVIS s.r.o.