Standards DIN - German national standards - Page 18086

Rubber floor coverings; determination of indention hardness by means of a durometer (Shore A hardness).
(Bodenbeläge aus Elastomeren; Härteprüfung nach Shore A.)

WITHDRAWN published on 1.7.1992

Green coffee; determination of loss in mass at 105 °C.
(Rohkaffee; Bestimmung des Massenverlustes bei 105 °C.)

WITHDRAWN published on 1.11.1984

Green coffee; determination of loss in mass at 105 °C; identical with ISO 6673, edition 1983.
(Rohkaffee; Bestimmung des Massenverlustes bei 105 °C.)

WITHDRAWN published on 1.2.1986

Green coffee - Determination of loss in mass at 105 °C.
(Rohkaffee - Bestimmung des Massenverlustes bei 105 °C.)

WITHDRAWN published on 1.10.2005

Round steel - Round iron - Bare drawn - Accuracy - 10 units according to DIN 1750.
(Rundstahl - Rundeisen - blank gezogen - Genauigkeit - 10 Einheiten nach DIN 1750.)

WITHDRAWN published on 1.9.1923

Round steel; drawn or turned - 10 fitting units.
(Rundstahl; gezogen oder gedreht - 10 Paßeinheiten.)

WITHDRAWN published on 1.5.1932

Round steel; drawn or turned; ISA rule h11.
(Rundstahl blank; gezogen oder gedreht; ISA-Lehre h11.)

WITHDRAWN published on 1.10.1938

Round steel; drawn or turned; ISA tolerance zone h11.
(Rundstahl; gezogen oder gedreht; ISA-Toleranzfeld h11.)

WITHDRAWN published on 1.2.1943

Bright round steel; Dimensions, Permissible deviations according to ISA tolerance zone h11; Weights.
(Blanker Rundstahl; Maße, zulässige Abweichungen nach ISA-Toleranzfeld h11; Gewichte.)

WITHDRAWN published on 1.5.1959

Bright round steel; Dimenions, Permissible deviations according to ISO tolerance zone h11.
(Blanker Rundstahl; Maße, zulässige Abweichungen nach ISO-Toleranzfeld h11.)

WITHDRAWN published on 1.9.1979