Amendment 1 - Radio-frequency connectors. Part 9: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with screw coupling - Characteristic impedance 50 ohms (Type SMC)
(Amendement 1 - Connecteurs pour frequences radioelectriques. Neuvieme partie: Connecteurs coaxiaux pour frequences radioelectriques avec diametre interieur du conducteur exterieur de 3 mm (0,12 in) a verrouillage a vis - Impedance caracteristique 50 ohms (type SMC))

Change published on 20.3.1996

Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
(Methode d´essai pour la determination de l´indice de temperature des fils de bobinage emailles et enveloppes de ruban)

Standard published on 23.11.2020

Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires

Standard published on 23.11.2020

Guidance for the selection of high-voltage A.C. cable systems
(Lignes directrices pour le choix de systemes de cables a haute tension en courant alternatif)

Standard published on 14.1.2015

High-pressure mercury vapour lamps - Performance specifications
(Lampes a vapeur de mercure a haute pression - Prescriptions de performance)

Standard published on 30.5.2001

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods

Standard published on 22.6.2018

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods

Standard published on 22.6.2018

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations

Standard published on 23.5.2007

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples

Standard published on 23.5.2007

Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices
(Normalisation mecanique des dispositifs a semiconducteurs - Partie 1: Regles generales pour la preparation des dessins d’encombrement des dispositifs discrets)

Standard published on 23.1.2018