Fire hazard testing - Part 2-10: Glowing/Hot-wire based test methods - Glow-wire apparatus and common test procedure
(Essais relatifs aux risques du feu - Partie 2-10: Essais au fil incandescent/chauffant - Appareillage et methode commune d´essai)

Standard published on 8.5.2026

Fire hazard testing - Part 2-10: Glowing/Hot-wire based test methods - Glow-wire apparatus and common test procedure

Standard published on 8.5.2026

Radiation protection instrumentation - Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 2: Specific requirements for radioactive aerosol monitors including transuranic aerosols
(Instrumentation pour la radioprotection - Equipements de surveillance en continu de la radioactivite dans les effluents gazeux - Partie 2: Exigences particulieres aux moniteurs d´aerosols radioactifs, y compris les aerosols transuraniens)

Standard published on 12.5.2026

Optical fibre cables - Part 1-125: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Ripcord functional test, Method E25
(Cables a fibres optiques - Partie 1-125: Specification generique - Procedures fondamentales d’essais des cables optiques - Methodes d’essais mecaniques - Essai de fonctionnement du fil de dechirement, Methode E25)

Standard published on 8.5.2026

Low-voltage switchgear and controlgear - Part 10: Semiconductor circuit-breakers
(Appareillage a basse tension - Partie 10: Disjoncteurs a semiconducteurs)

Standard published on 12.5.2026

Low-voltage switchgear and controlgear - ALL PARTS

Standard published on 12.5.2026

Renewable energy off-grid systems - Part 341: Selection of batteries and battery management systems for stand-alone electrification systems - Specific case of automotive flooded lead-acid batteries available in developing countries

Standard published on 6.5.2026

Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium, total bromine, total phosphorus, total chlorine, total tin and total antimony content by X-ray fluorescence spectrometry
(Determination de certaines substances dans les produits electrotechniques - Partie 3-1: Detection - Presence de plomb, mercure, cadmium, chrome total, brome total, phosphore total, chlore total, etain total et antimoine total par la spectrometrie de fluorescence X)

Standard published on 6.5.2026

Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium, total bromine, total phosphorus, total chlorine, total tin and total antimony content by X-ray fluorescence spectrometry

Standard published on 6.5.2026

Nanomanufacturing - Product specification - Part 2-1: Carbon nanotube-related products - Blank detail specification: single-walled carbon nanotubes in powders and dispersions

Standard published on 7.5.2026