Standards IEC - International electro-technical commission - Page 536

General considerations for telecommunication services for electric power systems
(Considerations generales sur les systemes de telecommunications pour les reseaux d´energie electrique)

Standard published on 15.4.1992

Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements
(Revetements appliques sur les cartes de cablage imprimees (revetements enrobants) - Partie 1: Definitions, classification et exigences generales)

Standard published on 26.1.2004

Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
(Revetements appliques sur les cartes de cablage imprimees (revetements enrobants) - Partie 2: Methodes d´essai)

Standard published on 17.2.2004

Corrigendum 1 - Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
(Corrigendum 1 - Revetements appliques sur les cartes de cablage imprimees (revetements enrobants) - Partie 2: Methodes d´essai)

Correction published on 11.1.2005

Coatings for loaded printed wire boards (conformal coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)
(Revetements appliques sur les cartes de cablage imprimees (revetements enrobants) - Partie 3-1: Specifications pour materiaux particuliers - Revetements a usage general (Classe 1), pour hautes performances (Classe 2) et pour l´aerospatiale (Classe 3))

Standard published on 9.2.2004

Characteristics and measurements of ultrasonic piezoceramic transducers
(Caracteristiques et mesures des transducteurs piezoceramiques ultrasonores)

Standard published on 1.9.1991

Round wire concentric lay overhead electrical stranded conductors
(Conducteurs pour lignes aeriennes a brins circulaires, cables en couches concentriques)

Standard published on 20.6.1991

Amendment 1 - Round wire concentric lay overhead electrical stranded conductors
(Amendement 1 - Conducteurs pour lignes aeriennes a brins circulaires, cables en couches concentriques)

Change published on 23.5.1997

Measurement microphones - Part 1: Specifications for laboratory standard microphones
(Microphones de mesure - Partie 1: Specifications des microphones etalons de laboratoire)

Standard published on 21.7.2000

Electroacoustics - Measurement microphones - Part 10: Absolute pressure calibration of microphones at low frequencies using calculable pistonphones

Standard published on 4.8.2022