Standards STN - Slovak standards - Page 441

Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006)

WITHDRAWN published on 1.3.2008

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020)

WITHDRAWN published on 1.4.2021

Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting (ISO 8501-4:2006)

WITHDRAWN published on 1.6.2007

Determination of resistance to intergranular corrosion of stainless steels. Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

Standard published on 1.5.2001

Determination of resistance to intergranular corrosion of stainless steels. Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in media containing sulfuric acid

Standard published on 1.5.2001

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)

Standard published on 1.7.2017

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)

Standard published on 1.6.2018

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 4: Guidance on the estimation of the probability of condensation prior to paint application

Standard published on 1.6.2018

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:2025)

Standard published on 1.10.2025

Preparation of steel substrates before application of paints and related products. Test for the assessment of surface cleanliness. Part 6: Extraction of water soluble contaminants for analysis (Bresle method)

Standard published on 1.5.2021