PROCEDURE FOR MONITORING AND CHARACTERISATION OF INSTALLATION OF CONSTRUCTION SYSTEMS WITH GYPSUM PLASTERBOARDS FOR LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION

Standard published on 29.5.2019

FIBRE ROPES - HIGH MODULUS POLYETHYLENE - 8-STRAND BRAIDED ROPES, 12-STRAND BRAIDED ROPES AND COVERED ROPES (ISO 10325:2018)

Standard published on 8.5.2019

PAPER AND BOARD. DETERMINATION OF ALKALI RESERVE

Standard published on 22.5.2019

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR METALLIC BLAST-CLEANING ABRASIVES - PART 2: CHILLED-IRON GRIT (ISO 11124-2:2018, CORRECTED VERSION 2018-12)

Standard published on 22.5.2019

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR METALLIC BLAST-CLEANING ABRASIVES - PART 4: LOW-CARBON CAST-STEEL SHOT (ISO 11124-4:2018)

Standard published on 22.5.2019

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (ISO 11125-2:2018)

Standard published on 22.5.2019

PAPER AND BOARD. DETERMINATION OF CIE WHITENESS CIE, C/2o (INDOOR ILLUMINATION CONDITIONS)

Standard published on 22.5.2019

NON-DESTRUCTIVE TESTING - INDUSTRIAL RADIOGRAPHIC FILMS - PART 2: CONTROL OF FILM PROCESSING BY MEANS OF REFERENCE VALUES (ISO 11699-2:2018)

Standard published on 22.5.2019

PLAYGROUND EQUIPMENT AND SURFACING - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CABLEWAYS

Standard published on 29.5.2019

PLAYGROUND EQUIPMENT AND SURFACING - PART 6: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR ROCKING EQUIPMENT

Standard published on 29.5.2019