Standards UNE - Spanish national standards - Page 272

Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)

Standard published on 18.7.2003

Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)

Standard published on 18.7.2003

Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)

Standard published on 25.7.2003

Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)

Standard published on 25.7.2003

Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction).

Correction published on 15.3.2006

Surface active agents - Determination of stability in hard water

Standard published on 21.9.1999

ADHESIVES - DETERMINATION OF ASH AND SULPHATED ASH

Standard published on 28.6.1999

Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2023)

Standard published on 24.4.2024

Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method (ISO 12460-4:2016)

Standard published on 28.9.2016

Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method) (ISO 12460-5:2015)

Standard published on 3.2.2016