|
1.1 This general requirements
specification covers a group of common requirements that, unless
otherwise specified in the applicable product specification, apply
to rolled steel plates for pressure vessels covered by each of the
following product specifications issued by ASTM:
|
Title of Specification
|
ASTM DesignationA
|
|
Pressure Vessel Plates, Alloy Steel,
Nickel
|
A203/A203M
|
|
Pressure Vessel Plates, Alloy Steel,
Molybdenum
|
A204/A204M
|
|
Pressure Vessel Plates, Alloy Steel,
Manganese-
Vanadium
|
A225/A225M
|
|
Pressure Vessel Plates, Carbon Steel,
Low- and
Intermediate-Tensile Strength
|
A285/A285M
|
|
Pressure Vessel Plates, Carbon Steel,
Manganese-Silicon
|
A299/A299M
|
|
Pressure Vessel Plates, Alloy Steel,
Manganese-
Molybdenum and Manganese-Molybdenum-Nickel
|
A302/A302M
|
|
Pressure Vessel Plates, Alloy Steel, 9
Percent Nickel
Double-Normalized and Tempered
|
A353/A353M
|
|
Pressure Vessel Plates, Alloy Steel,
Chromium-
Molybdenum
|
A387/A387M
|
|
Pressure Vessel Plates, Carbon Steel,
High Strength
Manganese
|
A455/A455M
|
|
Pressure Vessel Plates, Carbon Steel, for
Intermediate-
and Higher-Temperature Service
|
A515/A515M
|
|
Pressure Vessel Plates, Carbon Steel,
Moderate- and
Lower-Temperature Service
|
A516/A516M
|
|
Pressure Vessel Plates, Alloy Steel,
High-Strength,
Quenched and Tempered
|
A517/A517M
|
|
Pressure Vessel Plates, Alloy Steel,
Quenched and
Tempered Manganese-Molybdenum and Manganese-
Molybdenum- Nickel
|
A533/A533M
|
|
Pressure Vessel Plates, Heat-Treated,
Carbon-
Manganese-Silicon Steel
|
A537/A537M
|
|
Pressure Vessel Plates, Alloy Steel,
Quenched and
Tempered Chromium-Molybdenum
|
A542/A542M
|
|
Pressure Vessel Plates, Alloy Steel,
Quenched and
Tempered Nickel-Chromium-Molybdenum
|
A543/A543M
|
|
Pressure Vessel Plates, Alloy Steel,
Quenched and
Tempered 8 and 9 Percent Nickel
|
A553/A553M
|
|
|
|
|
|
|
|
Title of Specification
|
ASTM DesignationA
|
|
Pressure Vessel Plates, Carbon Steel,
Manganese-
Titanium for Glass or Diffused Metallic Coatings
|
A562/A562M
|
|
Pressure Vessel Plates, Carbon Steel,
High Strength, for
Moderate and Lower Temperature Service
|
A612/A612M
|
|
Pressure Vessel Plates, Five Percent
Nickel Alloy Steel,
Specially Heat Treated
|
A645/A645M
|
|
Pressure Vessel Plates, Carbon-Manganese,
for
Moderate and Lower Temperature Service
|
A662/A662M
|
|
Pressure Vessel Plates, Carbon Steel,
Quenched and
Tempered, for Welded Layered Pressure Vessels
|
A724/A724M
|
|
Pressure Vessel Plates, Alloy Steel and
High-Strength
Low-Alloy Steel, Quenched and Tempered
|
A734/A734M
|
|
Pressure Vessel Plates, Low-Carbon
Manganese-
Molybdenum-Columbium Alloy Steel, for Moderate and
Lower Temperature Service
|
A735/A735M
|
|
Pressure Vessel Plates, Low-Carbon
Age-Hardening
Nickel-Copper-Chromium-Molybdenum-Columbium
Alloy Steel
|
A736/A736M
|
|
Pressure Vessel Plates, High-Strength
Low-Alloy Steel
|
A737/A737M
|
|
Pressure Vessel Plates, Heat-Treated,
Carbon-
Manganese-Silicon Steel, for Moderate and Lower
Temperature Service
|
A738/A738M
|
|
Pressure Vessel Plates, Alloy Steel,
Chromium-
Molybdenum-Vanadium
|
A832/A832M
|
|
Pressure Vessel Plates, Produced by the
Thermo-
Mechanical Control Process (TMCP)
|
A841/A841M
|
|
Pressure Vessel Plates, 9 % Nickel Alloy,
Produced
by the Direct-Quenching Process
|
A844/A844M
|
|
Pressure Vessel Plates, 9 % Nickel Alloy,
Produced
by the Direct-Quenching Process
|
A844/A844M
|
|
Pressure Vessel Plates, 9 % Nickel Alloy,
Produced
by the Direct-Quenching Process
|
A844/A844M
|
|
Pressure Vessel Plates, Alloy Steel,
Chromium-
Molybdenum-Tungsten
|
A1017/A1017M
|
|
Pressure Vessel Plates, Alloy Steel,
Higher Strength
Chromium-Molybdenum-Tungsten
|
A1041/A1041M
|
A
These designations refer to the latest issue of the respective
specification which appears in the Annual Book
of ASTM Standards, Vol 01.04.
1.1.1 This general requirements
specification also covers a group of supplementary requirements
that are applicable to several of the above product specifications
as indicated therein. Such requirements are provided for use if
additional testing or additional restrictions are required by the
purchaser, and apply only if specified individually in the purchase
order.
1.2 Appendix X1 provides information on
coil as a source of plates for pressure vessels.
1.3 Appendix X2 provides information on
the variability of tensile properties in plates for pressure
vessels.
1.4 Appendix X3 provides information on
the variability of Charpy-V-Notch impact test properties in plates
for pressure vessels.
1.5 Appendix X4 provides information on
cold bending of plates, including suggested minimum inside radii
for cold bending.
1.6 These materials are intended to be
suitable for fusion welding. When the steel is to be welded, it is
presupposed that a welding procedure suitable for the grade of
steel and intended use or service will be utilized.
1.7 In case of any conflict in
requirements, the requirements of the applicable product
specification prevail over those of this general requirements
specification.
1.8 Additional requirements that are
specified in the purchase order and accepted by the supplier are
permitted, provided that such requirements do not negate any of the
requirements of this general requirements specification or the
applicable product specification.
1.9 For purposes of determining
conformance with this general requirements specification and the
applicable product specification, values are to be rounded to the
nearest unit in the right-hand place of figures used in expressing
the limiting values in accordance with the rounding method of
Practice E29.
1.10 The values stated in either SI units
or inch-pound units are to be regarded separately as standard. The
values stated in each system may not be exact equivalents;
therefore, each system shall be used independently of the other.
Combining values from the two systems may result in non-conformance
with the standard.
1.11 This general requirements
specification and the applicable product specification are
expressed in both inch-pound units and SI units; unless the order
specifies the applicable “M” specification
designation (SI units), the plates are to be furnished to
inch-pound units.
|
|
A387/A387M-25
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum
|
|
A941-26a
|
Standard Terminology Relating to Steel,
Stainless Steel, Related Alloys, and Ferroalloys (Includes all
amendments and changes 4/15/2026).
|
|
A832/A832M-25
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
|
|
A770/A770M-03(2025)
|
Standard Specification for
Through-Thickness Tension Testing of Steel Plates for Special
Applications
|
|
A751-25
|
Standard Test Methods and Practices for
Chemical Analysis of Steel Products
|
|
A738/A738M-19(2026)
|
Standard Specification for Pressure
Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for
Moderate and Lower Temperature Service
|
|
A737/A737M-17(2024)e1
|
Standard Specification for Pressure
Vessel Plates, High-Strength, Low-Alloy Steel (Includes all
amendments and changes 9/23/2024).
|
|
A736/A736M-25
|
Standard Specification for Pressure
Vessel Plates, Low-Carbon Age-Hardening
Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy
Steel
|
|
A735-A735M-12
|
Standard Specification for Pressure
Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy
Steel, for Moderate and Lower Temperature Service (Withdrawn
2017)
|
|
A285/A285M-24
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile
Strength
|
|
A299/A299M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, Manganese-Silicon
|
|
A302/A302M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel
|
|
A203/A203M-23
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Nickel
|
|
A204/A204M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Molybdenum
|
|
A225/A225M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
|
|
A263-12(2026)
|
Standard Specification for Stainless
Chromium Steel-Clad Plate
|
|
A264-12(2026)
|
Standard Specification for Stainless
Chromium-Nickel Steel-Clad Plate
|
|
A265-12(2026)
|
Standard Specification for Nickel and
Nickel-Base Alloy-Clad Steel Plate
|
|
A537/A537M-20
|
Standard Specification for Pressure
Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
|
|
A542/A542M-25
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-and-Tempered,
Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
|
|
A543/A543M-09(2021)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered
Nickel-Chromium-Molybdenum
|
|
A553/A553M-22
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered 7 %, 8 %, and 9 %
Nickel
|
|
A562/A562M-10(2021)
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or
Diffused Metallic Coatings
|
|
A577/A577M-17(2023)
|
Standard Specification for Ultrasonic
Angle-Beam Examination of Steel Plates
|
|
A517/A517M-17(2023)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, High-Strength, Quenched and
Tempered
|
|
A533/A533M-24
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel
|
|
A578/A578M-17(2023)
|
Standard Specification for Straight-Beam
Ultrasonic Examination of Rolled Steel Plates for Special
Applications
|
|
A612/A612M-20
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower
Temperature Service
|
|
A370-26
|
Standard Test Methods and Definitions for
Mechanical Testing of Steel Products
|
|
A1017/A1017M-17(2024)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
|
|
A435/A435M-17(2023)
|
Standard Specification for Straight-Beam
Ultrasonic Examination of Steel Plates
|
|
A455/A455M-12a(2023)
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, High-Strength Manganese (Includes all
amendments and changes 11/20/2023).
|
|
A515/A515M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, for Intermediate- and
Higher-Temperature Service
|
|
A516/A516M-25
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature
Service
|
|
A353/A353M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 %
Nickel
|
|
A645/A645M-10(2022)
|
Standard Specification for Pressure
Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat
Treated
|
|
A662/A662M-17(2024)
|
Standard Specification for Pressure
Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and
Lower Temperature Service
|
|
A700-14(2019)
|
Standard Guide for Packaging, Marking,
and Loading Methods for Steel Products for Shipment
|
|
A724/A724M-09(2023)
|
Standard Specification for Pressure
Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and
Tempered, for Welded Pressure Vessels
|
|
E21-20
|
Standard Test Methods for Elevated
Temperature Tension Tests of Metallic Materials
|
|
A841/A841M-17(2025)
|
Standard Specification for Steel Plates
for Pressure Vessels, Produced by Thermo-Mechanical Control Process
(TMCP)
|
|
A844/A844M-21
|
Standard Specification for Steel Plates,
9 % Nickel Alloy, for Pressure Vessels, Produced by the
Direct-Quenching Process
|
|
E29-22
|
Standard Practice for Using Significant
Digits in Test Data to Determine Conformance with
Specifications
|
|
E112-25
|
Standard Test Methods for Determining
Average Grain Size
|
|
E208-20e1
|
Standard Test Method for Conducting
Drop-Weight Test to Determine Nil-Ductility Transition Temperature
of Ferritic Steels (Includes all amendments and changes
2/9/2023).
|
|
E709-21
|
Standard Guide for Magnetic Particle
Testing
|
|
|
BoilerandPressureVesselCode, Section
IX
|
|
Fed.Std.No.123
|
Marking for Shipment (Civil Agencies)
|
|
B1
|
Bar Code Symbology Standard
|
|
A734-A734M-12
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel,
Quenched-and-Tempered (Withdrawn 2017)
|
|
Cookies
