Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM A302/A302M-97e1
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel (Includes all amendments And changes 8/16/2017).
Automatically translated name:
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
STANDARD published on 13.5.1999
The information about the standard:
Designation standards: ASTM A302/A302M-97e1
Note: WITHDRAWN
Publication date standards: 13.5.1999
SKU: NS-1937
The number of pages: 2
Approximate weight : 6 g (0.01 lbs)
Country: American technical standard
Category: Technical standards ASTM
Annotation of standard text ASTM A302/A302M-97e1 :
Keywords:
Manganese-molybdenum-nickel alloy, Pressure vessel steel materials-plates, Steel plate-manganese alloy, plates-Mn-Mo/Mn-Mo-Ni alloy steel, for welded boilers/pressure vessels, ICS Number Code 77.140.30 (Steels for pressure purposes), 77.140.50 (Flat steel products and semi-products)
Additional information
| 1. Scope | ||||||||
|
1.1 This specification covers manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates intended particularly for welded boilers and other pressure vessels. 1.2 Material under this specification is available in four grades having different strength levels as follows: Grade Tensile Strength, ksi [MPa] Type A 75-95 [515-655] Mn-Mo B 80-100 [550-690] Mn-Mo C 80-100 [550-690] Mn-Mo-Ni D 80-100 [550-690] Mn-Mo-Ni1.3 The maximum thickness of plates is limited only by the capacity of the chemical composition to meet the specified mechanical property requirements. The minimum thickness is limited to 0.25 in. [6.5 mm]. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. |
||||||||
| 2. Referenced Documents | ||||||||
|
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
