ASTM A450/A450M-03

Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

STANDARD published on 10.9.2003

Language
Format	Online Secure PDF - 86.00 USD Print design - 86.00 USD
Availability	IN STOCK
Price	86.00 USD excl. VAT
86.00 USD

The information about the standard:

Designation standards: ASTM A450/A450M-03
Note: WITHDRAWN
Publication date standards: 10.9.2003
SKU: NS-2522
The number of pages: 10
Approximate weight : 30 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM A450/A450M-03 :

Keywords:

alloy steel tube, austenitic stainless steel, carbon steel tube, general delivery, stainless steel tube, steel tube, ICS Number Code 23.040.10 (Iron and steel pipes)

Additional information

1. Scope

1.1 This specification covers a group of requirements which, with the exceptions of 4.3 and Sections 5, 6, 17, 18, 19, 20, 21, 22, and 23, are mandatory requirements to the following ASTM tubular product specifications:

These designations refer to the latest issue of the respective specifications.

Title of Specification	ASTM Designation

Electric-Resistance-Welded Carbon Steel and Carbon Manganese Steel Boiler Tubes	A 178/A 178M
Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes	A 179/A 179M
Seamless Carbon Steel Boiler Tubes for High-Pressure Service	A 192/A 192M
Seamless Medium-Carbon Steel Boiler and Superheater Tubes	A 210/A 210M
Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes	A 214/A 214M
Seamless and Electric-Welded Low-Alloy Steel Tubes	A 423/A 423M
Electric-Resistance-Welded Coiled Steel Tubing for Gasand Fuel Oil Lines	A 539
Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes	A 556/A 556M
Seamless, Cold-Drawn Carbon Steel Tubing for Hydraulic System Service	A 822

1.2 One or more of Sections 4.3, 5, 6, 17, 18, 19, 20, 20.1, 22, and 23 apply when the product specification or purchase order has a requirement for the test or analysis described by these sections.

1.3 In case of conflict between a requirement of the product specification and a requirement of this general requirement specification only the requirement of the product specification need be satisfied.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation (SI) of the product specification is specified in the order.

2. Referenced Documents

D3951-18(2023)	Standard Practice for Commercial Packaging
E92-23	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
A1047/A1047M-05(2023)	Standard Test Method for Pneumatic Leak Testing of Tubing
A214/A214M-25	Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A210/A210M-26	Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A192/A192M-24	Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A179/A179M-24	Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A178/A178M-25	Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A530/A530M-18	Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A498-06	Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
A423/A423M-19(2026)	Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
Fed. Std. No. 183	Continuous Identification Marking of Iron and Steel Products Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.
E570-25	Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
E426-16(2021)	Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
A941-26a	Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys (Includes all amendments and changes 4/15/2026).
A822/A822M-20	Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A751-25	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A556/A556M-26	Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A370-26	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
E309-24	Standard Practice for Eddy Current Examination of Steel Tubular Products
E273-25	Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
E213-22	Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
A1058-19	Standard Test Methods for Mechanical Testing of Steel Products´Metric

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.