|
1.1 This specification covers a group of
requirements which, with the exceptions of 4.3 and Sections 5, 6,
17, 18, 19, 20, 21, 22, and 23, are mandatory requirements to the
following ASTM tubular product specifications:
| Title of Specification |
ASTM Designation |
|
| Seamless Low-Carbon and Carbon-Molybdenum Steel Still Tubes for
Refinery Service |
A 161 |
| Electric-Resistance-Welded Carbon Steel and Carbon Manganese
Steel Boiler Tubes |
A 178/A 178M |
| Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and
Condenser Tubes |
A 179/A 179M |
| Seamless Carbon Steel Boiler Tubes for High-Pressure
Service |
A 192/A 192M |
| Seamless Cold-Drawn Intermediate Alloy-Steel Heat-Exchanger and
Condenser Tubes |
A 199/A 199M |
| Seamless Intermediate Alloy-Steel Still Tubes for Refinery
Service |
A 200 |
| Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater
Tubes |
A 209/A 209M |
| Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
A 210/A 210M |
| Seamless Ferritic and Austenitic Alloy-Steel Boiler,
Superheater, and Heat-Exchanger Tubes |
A 213/A 213M |
| Electric-Resistance-Welded Carbon Steel Heat-Exchanger and
Condenser Tubes |
A 214/A 214M |
| Electric-Resistance-Welded Carbon Steel Boiler and Superheater
Tubes for High-Pressure Service |
A 226/A 226M |
| Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger,
and Condenser Tubes |
A 249/A 249M |
| Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and
Superheater Tubes |
A 250/A 250M |
| Seamless and Welded Ferritic and Martensitic Stainless Steel
Tubing for General Service |
A 268/A 268M |
| Seamless and Welded Austenitic Stainless Steel Tubing for
General Service |
A 269 |
| Seamless and Welded Austenitic Stainless Steel Sanitary
Tubing |
A 270 |
| Seamless Austenitic Chromium-Nickel Steel Still Tubes for
Refinery Service |
A 271 |
| Seamless and Welded Carbon and Alloy-Steel Tubes
forLow-Temperature Service |
A 334/A 334M |
| Seamless and Electric-Welded Low-Alloy Steel Tubes |
A 423/A 423M |
| Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel
Oil Lines |
A 539 |
| Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
A 556/A 556M |
| Electric-Resistance-Welded Carbon Steel Feedwater Heater
Tubes |
A 557/A 557M |
| Welded Austenitic Stainless Steel Feedwater Heater Tubes |
A 688/A 688M |
| Seamless Medium-Strength Carbon-Molybdenum Alloy-Steel Boiler
and Superheater Tubes |
A 692 |
| Austenitic Stainless Steel Tubing for Breeder Reactor Core
Components |
A 771 |
| Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing
for General Service |
A 789/A 789M |
| Welded Unannealed Ferritic Stainless Steel Tubing |
A 791/A 791M |
| Welded Ferritic Stainless Steel Feedwater Heater Tubes |
A 803/A 803M |
| Seamless, Cold-Drawn Carbon Steel Tubing for Hydrau-lic System
Service |
A 822 |
| Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder
Reactor Core Components |
A 826 |
| High-Frequency Induction Welded, Unannealed Austenitic Steel
Condenser Tubes |
A 851 |
| A These designations refer to the latest issue of
the respective specifications. |
1.2 One or more of Sections 4.3, 5, 6,
17, 18, 19, 20, 20.1, 22, and 23 apply when the product
specification or purchase order has a requirement for the test or
analysis described by these sections.
1.3 In case of conflict between a
requirement of the product specification and a requirement of this
general requirement specification only the requirement of the
product specification need be satisfied.
1.4 The values stated in either
inch-pound units or SI units are to be regarded separately as
standard. Within the text, the SI units are shown in brackets. The
values stated in each system are not exact equivalents; therefore,
each system must be used independently of the other. Combining
values from the two systems may result in nonconformance with the
specification. The inch-pound units shall apply unless the "M"
designation (SI) of the product specification is specified in the
order.
|
|
D3951-18(2023)
|
Standard Practice for Commercial
Packaging
|
|
E92-26
|
Standard Test Methods for Vickers
Hardness and Knoop Hardness of Metallic Materials
|
|
A1047/A1047M-05(2023)
|
Standard Test Method for Pneumatic Leak
Testing of Tubing
|
|
A214/A214M-25
|
Standard Specification for
Electric-Resistance-Welded Carbon Steel Heat-Exchanger and
Condenser Tubes
|
|
A210/A210M-26
|
Standard Specification for Seamless
Medium-Carbon Steel Boiler and Superheater Tubes
|
|
A192/A192M-24
|
Standard Specification for Seamless
Carbon Steel Boiler Tubes for High-Pressure Service
|
|
A179/A179M-24
|
Standard Specification for Seamless
Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
|
|
A178/A178M-25
|
Standard Specification for
Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel
Boiler and Superheater Tubes
|
|
A530/A530M-18(2026)
|
Standard Specification for General
Requirements for Specialized Carbon and Alloy Steel Pipe
|
|
A498-06
|
Standard Specification for Seamless and
Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
|
|
A423/A423M-19(2026)
|
Standard Specification for Seamless and
Electric-Welded Low-Alloy Steel Tubes
|
|
Fed. Std. No. 183
|
Continuous Identification Marking of Iron
and Steel Products Available from Standardization Documents Order
Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia,
PA 19111-5098.
|
|
E570-25
|
Standard Practice for Flux Leakage
Examination of Ferromagnetic Steel Tubular Products
|
|
E426-16(2021)
|
Standard Practice for Electromagnetic
(Eddy Current) Examination of Seamless and Welded Tubular Products,
Titanium, Austenitic Stainless Steel and Similar Alloys
|
|
A941-26a
|
Standard Terminology Relating to Steel,
Stainless Steel, Related Alloys, and Ferroalloys (Includes all
amendments and changes 4/15/2026).
|
|
A822/A822M-20
|
Standard Specification for Seamless
Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
|
|
A751-25
|
Standard Test Methods and Practices for
Chemical Analysis of Steel Products
|
|
A700-14(2019)
|
Standard Guide for Packaging, Marking,
and Loading Methods for Steel Products for Shipment
|
|
A556/A556M-26
|
Standard Specification for Seamless
Cold-Drawn Carbon Steel Feedwater Heater Tubes
|
|
A370-26
|
Standard Test Methods and Definitions for
Mechanical Testing of Steel Products
|
|
E309-24
|
Standard Practice for Eddy Current
Examination of Steel Tubular Products
|
|
E273-25
|
Standard Practice for Ultrasonic Testing
of the Weld Zone of Welded Pipe and Tubing
|
|
E213-22
|
Standard Practice for Ultrasonic Testing
of Metal Pipe and Tubing
|
|
A1058-19
|
Standard Test Methods for Mechanical
Testing of Steel Products´Metric
|
|
Cookies
