ASTM A513/A513M-20a

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing (Includes all amendments and changes 7/21/2020).

Translate name

STANDARD published on 1.7.2020

Language
Format	PDF - Immediate download - 90.00 USD PDF + redline - Immediate - 108.00 USD Print design - 90.00 USD Print + redline - 108.00 USD
Availability	IN STOCK
Price	90.00 USD excl. VAT
90.00 USD

The information about the standard:

Designation standards: ASTM A513/A513M-20a
Publication date standards: 1.7.2020
SKU: NS-999906
The number of pages: 21
Approximate weight : 63 g (0.14 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Iron and steel pipes

Annotation of standard text ASTM A513/A513M-20a :

This specification covers round, square, rectangular, and special shape electric-resistance-welded carbon and alloy steel mechanical tubing produced by hot- or cold-rolling. The types of tubing covered here are: Type 1a, as-welded from hot-rolled steel (with mill scale); Type 1b, as-welded from hot-rolled pickled and oiled steel (mill scale removed); Type 2, as-welded from cold-rolled steel; Type 3, sink-drawn hot-rolled steel; Type 4, sink-drawn cold-rolled steel; Type 5, drawn over a mandrel; and Type 6, special smooth inside diameter. Heat and product analyses shall be made to determine the percentages of chemical elements, to which the steel specimens shall conform to. Tubing shall be free of injurious defects and shall have a workmanlike finish. When specified, tubing shall be coated with a film of rust retarding oil before shipping.

Keywords:
alloy steel tube, carbon steel tube, mechanical tubing, resistance welded steel tube, steel tube, welded steel tube,, ICS Number Code 23.040.10 (Iron and steel pipes)

Additional information

1. Scope

1.1 This specification covers electric-resistance-welded carbon and alloy steel tubing for use as mechanical tubing.

1.2 This specification covers mechanical tubing made from hot- or cold-rolled steel.

1.3 This specification covers round, square, rectangular, and special shape tubing.

Type

Size Range
(Round Tubing)

Electric-Resistance-Welded Tubing from Hot-Rolled Steel

outside diameter from ¹/₂ to 15 in.
[12.7 to 380 mm]

wall from 0.065 to 0.650 in.
[1.65 to 16.5 mm]

Electric-Resistance-Welded Tubing from Cold-Rolled Steel

outside diameter from ³/₈ to 12 in.
[9.5 to 300 mm]

wall from 0.022 to 0.134 in.
[0.56 to 3.40 mm]

1.3.1 Indeterminate wall thicknesses may be ordered. In those cases the more stringent tolerances of Tables 4, 6, 7, 8, 9, 10, 11, 12, 16, and 17 shall apply. When sizes within the allowable ranges are ordered all other requirements of the specification shall be met.

1.4 This specification covers mechanical tubing in various Grades (see Section 5), Types (see 12.1), and Thermal Conditions (12.1).

1.5 Optional supplementary requirements are provided and when desired, shall be so stated in the order.

1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. In this specification hard or rationalized conversions apply to diameters, lengths and tensile properties. Soft conversion applies to other SI measurements.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

E309-16	Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
E273-20	Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
A1040-17(2022)	Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1039/A1039M-20	Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
A1011/A1011M-23	Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
E213-22	Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E570-20	Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
B?46.1	Surface Texture
MIL-STD-129	Marking for Shipment and Storage
Fed. Std. No. 123	Marking for Shipments (Civil Agencies)
A1008/A1008M-23e1	Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable (Includes all amendments and changes 12/29/2023).
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.