ASTM A537/A537M-95(2000)

Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

STANDARD published on 1.1.2000

Language
Format	Online Secure PDF - 77.00 USD Print design - 77.00 USD
Availability	IN STOCK
Price	77.00 USD excl. VAT
77.00 USD

The information about the standard:

Designation standards: ASTM A537/A537M-95(2000)
Note: WITHDRAWN
Publication date standards: 1.1.2000
SKU: NS-3038
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM A537/A537M-95(2000) :

Keywords:

carbon steel plate, pressure containing parts, pressure vessel steels, steel plates for pressure vessel application, ICS Number Code 77.140.50 (Flat steel products and semi-products)

Additional information

1. Scope

1.1 This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures.

1.2 Material under this specification is available in the following three classes:

			Yield	Tensile
			Strength,	Strength,
	Heat	Thickness,	min, ksi	min, ksi
Class	Treatment		[MPa]	[MPa]

1	Normalized	21/2 in. and under[65 mm and under]	50 [345]	70 [485]
		Over 21/2 to 4 in.[Over 65 to 100 mm]	45[310]	65[450]
2	Quenched and tempered	21/2 in. and under[65 mm and under]	60 [415]	80 [550]
		Over 21/2 to 4 in.[Over 65 to 100 mm]	55[380]	75[515]
		Over 4 to 6 in.[Over 100 to 150 mm]	46[315]	70[485]
3	Quenched and tempered	21/2 in. and under[65 mm and under]	55 [380]	80 [550]
		Over 21/2 to 4 in.[Over 65 to 100 mm]	50[345]	75[515]
		Over 4 to 6 in.[Over 100 to 150 mm]	40[275]	70[485]

1.3 The maximum thickness of plates furnished under this specification is 4 in. [100 mm] for Class 1 and 6 in. [150 mm] for Class 2 and Class 3.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

2. Referenced Documents

A20/A20M-20	Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A577/A577M-17(2023)	Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M-17(2023)	Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A435/A435M-17(2023)	Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.