ASTM A703/A703M-02

Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

STANDARD published on 10.12.2002

Language
Format	Online Secure PDF - 96.00 USD Print design - 96.00 USD
Availability	IN STOCK
Price	96.00 USD excl. VAT
96.00 USD

The information about the standard:

Designation standards: ASTM A703/A703M-02
Note: WITHDRAWN
Publication date standards: 10.12.2002
SKU: NS-3754
The number of pages: 15
Approximate weight : 45 g (0.10 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM A703/A703M-02 :

Keywords:

castings, general requirements, pressure containing, steel, ICS Number Code 77.140.80 (Iron and steel castings)

Additional information

1. Scope

1.1 This specification covers a group of common requirements that, unless otherwise specified in an individual specification, shall apply to steel castings for pressure-containing parts under each of the following ASTM specifications:

Title of Specification	ASTM Designation

Steel Castings, Carbon, Suitable for Fusion Welding	A 216/A 216M
for High-Temperature Service
Steel Castings, Martensitic Stainless and Alloy, for	A 217/A 217M
Pressure-Containing Parts Suitable for High-
Temperature Service
Steel Castings, Austenitic, for High-Temperature	A 351/A 351M
Service
Steel Castings, Ferritic and Martensitic, for Pressure-	A 352/A 352M
Containing Parts Suitable for Low-Temperature
Service
Steel Castings, Alloy, Specially Heat-Treated, for	A 389/A 389M
Pressure-Containing Parts, Suitable for High-
Temperature Service
Steel Castings Suitable for Pressure Service	A 487/A 487M

1.2 This specification also covers a group of supplementary requirements which may be applied to the above specifications as indicated therein. These are provided for use when additional testing or inspection is desired and apply only when specified individually by the purchaser in the order.

1.3 In case of conflict between the requirements of the individual specification and this general specification, the former shall prevail.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. Inch-pound units are applicable for material ordered to Specification A 703 and SI units for material ordered to Specification A 703M.

2. Referenced Documents

A380-06	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
E446-20	Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
A487/A487M-21	Standard Specification for Steel Castings Suitable for Pressure Service
A488/A488M-18e2	Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel (Includes all amendments and changes 2/12/2020).
A609/A609M-12(2023)	Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A800/A800M-20	Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite
A217/A217M-22	Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A351/A351M-18e1	Standard Specification for Castings, Austenitic, for Pressure-Containing Parts (Includes all amendments and changes 8/27/2019).
A352/A352M-21	Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A216/A216M-21	Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
E709-21	Standard Guide for Magnetic Particle Testing
A802-A802M-95(2001)	Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A903/A903M-99(2024)	Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A941-23	Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A967-05	Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A990-11	Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A991/A991M-22	Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A995/A995M-20	Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A1058-19	Standard Test Methods for Mechanical Testing of Steel Products´Metric
A1067/A1067M-12a(2018)	Standard Specification for Test Coupons for Steel Castings (Includes all amendments and changes 3/9/2018).
A1080-15	Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E94-04	Standard Guide for Radiographic Examination
E125-63(2023)	Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
E165-09	Standard Practice for Liquid Penetrant Examination for General Industry
B16.5	Pipe Flanges and Flanged Fittings
E186-20	Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings
E208-20e1	Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels (Includes all amendments and changes 2/9/2023).
E280-21	Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
E340-23	Standard Practice for Macroetching Metals and Alloys
E353-19e1	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (Includes all amendments and changes 2/23/2022).
E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
A389/A389M-13(2018)	Standard Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.