ASTM A749/A749M-14

Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

STANDARD published on 1.5.2014

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM A749/A749M-14
Note: WITHDRAWN
Publication date standards: 1.5.2014
SKU: NS-4005
The number of pages: 8
Approximate weight : 24 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Flat steel products and semi-products

Annotation of standard text ASTM A749/A749M-14 :

Keywords:

carbon, steel, strip, ICS Number Code 77.140.50 (Flat steel products and semi-products)

Additional information

1. Scope

1.1 This specification covers the general requirements for hot-rolled steel strip in coils and cut lengths. It applies to carbon steel and high-strength, low-alloy steel furnished as hot-rolled.

1.2 This specification is not applicable to hot-rolled heavy-thickness carbon sheet and strip coils (Specification A1018/A1018M), cold-rolled carbon steel strip (Specification A109/A109M), high-strength, low-alloy cold-rolled steel (Specifications A606/A606M and A1008/A1008M) or cold-rolled high carbon steel (Specification A684/A684M).

1.3 In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of this general specification.

1.4 For the purposes of determining conformance with this and the appropriate product specification referenced under 1.5 Annex A1 lists permissible variations in dimensions and mass (Note 1) in SI [metric] units. The values listed are not exact conversions of the values listed in the inch-pound tables, but instead are rounded or rationalized values. Conformance to 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.7 This specification and the applicable material specifications are expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

2. Referenced Documents

A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A941-23	Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A1018/A1018M-23a	Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength (Includes all amendments and changes 12/8/2023).
Fed. Std. No. 183	Continuous Identification Marking of Iron and Steel Products
Fed. Std. No. 123	Marking for Shipments (Civil Agencies)
MIL-STD-129	Marking for Shipment and Storage
E290-22	Standard Test Methods for Bend Testing of Material for Ductility
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
A1008/A1008M-23e1	Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable (Includes all amendments and changes 12/29/2023).
A606/A606M-23	Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
E11-22	Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
A568/A568M-19a	Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for (Includes all amendments and changes 11/22/2019).
A109/A109M-24	Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A684/A684M-17	Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment

Similar standards:

ASTM B114-07(2013)..

Historical
1.5.2013

ASTM B435-06(2011)e1..

Historical
1.6.2011

ASTM B463-10

Historical
1.6.2010

ASTM B688-96(2009)..

Historical
15.4.2009

ASTM B709-04(2009)..

Historical
15.4.2009

ASTM B932-04(2010)..

Historical
1.12.2010

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.