We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing (Includes all amendments And changes 11/29/2022).
Translate name
STANDARD published on 1.11.2020
Designation standards: ASTM A787/A787M-20a
Note: WITHDRAWN
Publication date standards: 1.11.2020
SKU: NS-1012980
The number of pages: 10
Approximate weight : 30 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
carbon steel tube, metallic-coated tubing, resistance welded steel tube, steel tube, welded steel tube,, ICS Number Code 23.040.40 (Metal fittings)
1. Scope | ||||||||||||
1.1?This specification covers round, square, rectangular, and special shape, electric-resistance-welded carbon steel mechanical tubing, either zinc-coated (galvanized) after welding or produced from aluminum-coated, zinc-coated (galvanized), zinc-iron alloy-coated (galvannealed), 55 % aluminum-zinc alloy-coated, or zinc-aluminum-magnesium alloy-coated carbon steel sheet. Tubing for use as electrical conduit (EMT) or intermediate metallic conduit (IMC) is not covered by this specification. 1.1.1?The product is available in various grades based on chemical requirements (Sections 5 and 9). 1.1.2?The product is available in various Types (Section 3). 1.2?This specification covers mechanical tubing with outside diameters or maximum outside dimensions ranging from 1/2?to 15 in. [12.7 to 380.0 mm] and wall thickness from 0.028 to 0.180 in. [0.70 to 4.60 mm]. Indeterminate wall thicknesses may be ordered. In those cases the more stringent tolerances of Tables 3, 4, 5, 6, 12 and 13 shall apply. 1.3?When sizes within the ranges listed above are ordered, all other requirements of the specification shall be met. 1.4?This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order specifies the applicable M specification designation (SI units), the inch-pound units shall apply. The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
Latest update: 2024-05-16 (Number of items: 2 902 054)
© Copyright 2024 NORMSERVIS s.r.o.