ASTM A711/A711M-07(2..
ASTM A727/A727M-13..
ASTM A745/A745M-12..
ASTM A768/A768M-05(2..
ASTM A788/A788M-14..
ASTM A836/A836M-13..
Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM A915/A915M-08(2013)
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
STANDARD published on 1.4.2013
The information about the standard:
Designation standards: ASTM A915/A915M-08(2013)
Note: WITHDRAWN
Publication date standards: 1.4.2013
SKU: NS-4792
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM A915/A915M-08(2013) :
Keywords:
alloy steel, carbon steel, steel castings, ICS Number Code 77.140.85 (Iron and steel forgings)
Additional information
| 1. Scope | ||||||||
|
1.1 This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades. 1.2 Several grades are covered and are designated by chemical composition shown in Table 1. Grade |
C |
Mn |
P, max |
S, max |
Si |
Ni |
Cr |
Mo |
|
|
||||||||
|
SC 1020 |
0.18/0.23 |
0.40/0.80 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1025 |
0.22/0.28 |
0.40/0.80 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1030 |
0.28/0.34 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1040 |
0.37/0.44 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1045 |
0.43/0.50 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 4130 |
0.28/0.33 |
0.40/0.80 |
0.035 |
0.040 |
0.30/0.60 |
. . . |
0.80/1.10 |
0.15/0.25 |
|
SC 4140 |
0.38/0.43 |
0.70/1.10 |
0.035 |
0.040 |
0.30/0.60 |
. . . |
0.80/1.10 |
0.15/0.25 |
|
SC 4330 |
0.28/0.33 |
0.60/0.90 |
0.035 |
0.040 |
0.30/0.60 |
1.65/2.00 |
0.70/0.90 |
0.20/0.30 |
|
SC 4340 |
0.38/0.43 |
0.60/0.90 |
0.035 |
0.040 |
0.30/0.60 |
1.65/2.00 |
0.70/0.90 |
0.20/0.30 |
|
SC 8620 |
0.18/0.23 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
|
SC 8625 |
0.23/0.28 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
|
SC 8630 |
0.28/0.33 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3.1 Within the text, the SI units are shown in brackets.
1.3.2 Inch-pound units are applicable for material ordered to Specification A915 and SI units for material ordered to Specification A915M.
|
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
|
Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Includes all amendments and changes 10/29/2024). |
