ASTM A933/A933M-95(2001)

Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement

STANDARD published on 1.1.2001

Language
Format	Online Secure PDF - 86.00 USD Print design - 86.00 USD
Availability	IN STOCK
Price	86.00 USD excl. VAT
86.00 USD

The information about the standard:

Designation standards: ASTM A933/A933M-95(2001)
Note: WITHDRAWN
Publication date standards: 1.1.2001
SKU: NS-4879
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM A933/A933M-95(2001) :

Keywords:

coating requirements, concrete reinforcement, corrosion resistance, steel wire, vinyl coating, welded wire fabric, ICS Number Code 77.140.15 (Steels for reinforcement of concrete)

Additional information

1. Scope

1.1 This specification covers plain and deformed steel wire and plain and deformed steel welded wire fabric with protective vinyl (PVC, polyvinyl chloride, or polyvinyl chloride powder compound) coating. Class A is intended for use as reinforcement in concrete and Class B as reinforcement in earth.

1.2 Other thermoplastic organic coatings may be used provided they meet the requirements of this specification.

Note 1--The coating applicator is identified throughout this specification as the manufacturer.

1.3 Requirements for coatings are contained in Annex A1.

1.4 This specification is applicable for orders in either inch-pound units (as Specification A933) or in SI units [as Specification A933M].

1.5 The values stated in either inch-pound or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

2. Referenced Documents

SSPC-PA2	Measurement of Dry Coating Thickness with Magnetic Gages
TM-01-70	Visual Standard for Surfaces of New Steel Air Blast Cleaned with Sand Abrasive (NACE No. 2)
RP-287-87	Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surface Using a Replica Tape
G20-10(2024)	Standard Test Method for Chemical Resistance of Pipeline Coatings
G14-04(2024)	Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
G12-07	Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
G8-24	Standard Test Methods for Cathodic Disbonding of Coated Steel
D4060-25	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D2967-24	Standard Test Method for Corner Coverage of Powder Coatings
D2240-15(2021)	Standard Test Method for Rubber Property—Durometer Hardness
D374-99	Standard Test Methods for Thickness of Solid Electrical Insulation
B117-26	Standard Practice for Operating Salt Spray (Fog) Apparatus
A1064/A1064M-24	Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
TM-01-75	Visual Standard for Surfaces of New Steel Centrifugally Blast Cleaned with Steel Shot or Steel Grit (NACE No. 2)
A884/A884M-25	Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A775/A775M-22	Standard Specification for Epoxy-Coated Steel Reinforcing Bars
SSPC-SP 10	Near-White Blast Cleaning
SSPC-Vis?2	Standard Methods of Evaluating Degree of Rusting on Painted Steel Surfaces
SSPC-Vis?1	Pictorial Surface Preparation Standards for Painting Steel Surfaces

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.