We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
Translate name
STANDARD published on 1.10.2016
Designation standards: ASTM B401-12(2016)
Note: WITHDRAWN
Publication date standards: 1.10.2016
SKU: NS-665973
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
aluminum conductors, aluminum conductors, steel-reinforced, aluminum electrical conductor, compact round stranded conductors, concentric-lay-stranded conductors, electrical conductor, electrical conductor-aluminum, steel-reinforced conductors, stranded conductors,, ICS Number Code 29.060.20 (Cables)
1. Scope | ||||||||||||||||||||||||||
1.1 This specification covers compact round concentric-lay-stranded conductors made from aluminum 1350-H19 (extra hard) wires and round zinc-coated, aluminum-coated, or aluminum-clad steel core wires usually used in overhead lines. These conductors shall be constructed with one steel core wire surrounded by one or more layers of helically-laid compacted or otherwise shaped aluminum wires (Explanatory Note 1 and Note 2). 1.2 Compact ACSR covered by this specification has five types of steel core wire which are designated by abbreviations as follows (Explanatory Note 2 and Note 7). 1.2.1 ACSR/GA2/COMP—Compact ACSR using Class A zinc-coated steel wire, 1.2.2 ACSR/GC2/COMP—Compact ACSR using Class C zinc-coated steel wire, 1.2.3 ACSR/AW2/COMP—Compact ACSR using aluminum-clad steel wire, AW2 (Normal Strength). 1.2.4 ACSR/AW3/COMP—Compact ACSR using aluminum-clad steel wire, AW3 (High Strength). 1.3 The SI values of density and resistivity are to be regarded as standard. For all other properties the inch-pound values are to be regarded as standard and the SI units may be approximate. Note 1: Prior to 1975, aluminum 1350 was designated as EC
aluminum.
Note 2: The aluminum and temper designations conform to ANSI
H35.1. Aluminum 1350 corresponds to Unified Numbering System A91350
in accordance with Practice E527.
|
||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-05-01 (Number of items: 2 896 514)
© Copyright 2024 NORMSERVIS s.r.o.