ASTM B483/B483M-02

Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications

STANDARD published on 10.12.2002

Language
Format	Online Secure PDF - 86.00 USD Print design - 86.00 USD
Availability	IN STOCK
Price	86.00 USD excl. VAT
86.00 USD

The information about the standard:

Designation standards: ASTM B483/B483M-02
Note: WITHDRAWN
Publication date standards: 10.12.2002
SKU: NS-6860
The number of pages: 8
Approximate weight : 24 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM B483/B483M-02 :

Keywords:

aluminum alloy, drawn tubes, ICS Number Code 23.040.15 (Non-ferrous metal pipes)

Additional information

1. Scope

1.1 This specification covers aluminum and aluminum-alloy drawn tubes in straight lengths and coils for general purpose applications in the alloys (Note 0), and tempers shown in . Coiled tubes are generally available only as round tubes with a wall thickness not exceeding 0.083 in. [2.00 mm] and only in non-heat-treatable alloys.

Note 1—For drawn seamless tubes, see Specifications B 210 and B 210M, for tubes to be used in condensers and heat exchangers, Specifications B 234 and B 234M, and for seamless pipe, Specification B 241/B 241M.

Note 2—Throughout this specification use of the term alloyin the general sense includes aluminum as well as aluminum alloy.

1.2 Alloy and temper designations are in accordance with ANSI H35.1 and H35.1M. The equivalent Unified Number System alloy designations are those of preceded by A9, for example A91060 for aluminum 1060 in accordance with Practice E 527.

1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

2. Referenced Documents

B597-92(1998)	Standard Practice for Heat Treatment of Aluminum Alloys (Withdrawn 2002)
B666/B666M-20	Standard Practice for Identification Marking of Aluminum and Magnesium Products
B881-25a	Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products (Includes all amendments and changes 1/8/2026).
E607-02	Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
E716-16(2021)e2	Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry (Includes all amendments and changes 9/7/2022).
E1251-25	Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
B557M-15(2023)	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
B660-23	Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
E34-11	Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
B241/B241M-22	Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B429-02	Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B210-12	Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B234-17(2025)	Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
B234M-17(2025)	Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
B210M-12	Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric) (Withdrawn 2019)
B557-15(2023)	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B918-01	Standard Practice for Heat Treatment of Wrought Aluminum Alloys
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E215-22	Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
H35.1/H35.1(M)	Alloy and Temper Designation Systems
H35.2	Dimensional Tolerances for Aluminum Mill Products
H35.2M	Dimensional Tolerances for Aluminum Mill Products [Metric]
MIL-STD-129	Marking for Shipment and Storage
AMS 2770	Heat Treatment of Wrought Aluminum Alloy Parts
AMS 2772	Heat Treatment of Aluminum Alloy Raw Materials
Fed. Std. No. 123	Marking for Shipment (Civil Agencies)

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.