We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
STANDARD published on 1.2.2013
Designation standards: ASTM B582-07(2013)
Note: WITHDRAWN
Publication date standards: 1.2.2013
SKU: NS-7270
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
plate, sheet, strip, N06007, N60975, N06985, N06030, ICS Number Code 77.150.40 (Nickel and chromium products)
1. Scope | |||||
1.1 The specification2 covers plate, sheet, and strip of nickel-chromium-iron-molybdenum-copper alloys (UNS N06007, N06975, N06985, and N06030)* as shown in Table 1, for use in general corrosive service. Element |
Composition Limits, % |
||||
|
Alloy N06007 |
Alloy N06975 |
Alloy N06985 |
Alloy N06030 |
|
Nickel |
|
remainderA |
47.0 to 52.0 |
remainderA |
remainderA |
Chromium |
|
21.0 to 23.5 |
23.0 to 26.0 |
21.0 to 23.5 |
28.0 to 31.5 |
Iron |
|
18.0 to 21.0 |
remainderA |
18.0 to 21.0 |
13.0 to 17.0 |
Molybdenum |
|
5.5 to 7.5 |
5.0 to 7.0 |
6.0 to 8.0 |
4.0 to 6.0 |
Copper |
|
1.5 to 2.5 |
0.70 to 1.20 |
1.5 to 2.5 |
1.0 to 2.4 |
Manganese |
|
1.0 to 2.0 |
1.0 max |
1.0 max |
1.5 max |
Cobalt, max |
|
2.5 |
... |
5.0 |
5.0 |
Carbon, max |
|
0.05 |
0.03 |
0.015 |
0.03 |
Tungsten |
|
1.0 max |
... |
1.5 max |
1.5 to 4.0 |
Silicon, max |
|
1.0 |
1.0 |
1.0 |
0.8 |
Phosphorus, max |
|
0.04 |
0.03 |
0.04 |
0.04 |
Sulfur, max |
|
0.03 |
0.03 |
0.03 |
0.02 |
Columbium + tantalum |
|
1.75 to 2.50 |
... |
0.50 max |
0.30 to 1.50 |
Titanium |
|
... |
0.70–1.50 |
... |
... |
1.2.1 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.2.2 Plate—Hot or cold rolled, solution annealed, and descaled.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
Historical
1.10.2009
Historical
1.5.2011
Historical
1.3.2008
Historical
1.10.2013
Historical
1.10.2009
Historical
1.10.2013
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
Latest update: 2024-03-25 (Number of items: 2 885 931)
© Copyright 2024 NORMSERVIS s.r.o.