Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM B983-13
Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
STANDARD published on 1.2.2013
The information about the standard:
Designation standards: ASTM B983-13
Note: WITHDRAWN
Publication date standards: 1.2.2013
SKU: NS-8986
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
Annotation of standard text ASTM B983-13 :
Keywords:
seamless cold worked pipe, seamless cold worked tube, seamless precipitation hardened pipe, seamless precipitation hardened tube, UNS N07022, UNS N07725, UNS N07740, UNS N09945, UNS N09925, UNS N07718, UNS N10276, UNS N06985, ICS Number Code 23.040.15 (Non-ferrous metal pipes)
Additional information
| 1. Scope | ||||||||
|
1.1 This specification covers high strength, seamless pipe and tube of nickel alloys (UNS N07022, UNS N07725, UNS N07740, UNS N09945, UNS N09925, UNS N07718, UNS N10276, UNS N06985) Element |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
|
Carbon |
0.010 max |
0.03 max |
0.005-0.08 |
0.005-0.04 |
0.03 max |
0.08 max |
0.02 max |
0.015 max |
|
Manganese |
0.5 max |
0.35 max |
1.0 max |
1.0 max |
1.00 max |
0.35 max |
1.0 max |
1.0 max |
|
Silicon |
0.08 max |
0.20 max |
1.0 max |
0.5 max |
0.50 max |
0.35 max |
0.08 max |
1.0 max |
|
Phosphorous |
0.025 max |
0.015 max |
0.03 max |
0.03 max |
... |
0.015 max |
0.030 max |
0.04 max |
|
Sulfur |
0.015 max |
0.010 max |
0.03 max |
0.03 max |
0.030 max |
0.015 max |
0.030 max |
0.03 max |
|
Chromium |
20.0-21.4 |
19.0-22.5 |
23.5-25.5 |
19.5-23.0 |
19.5-23.5 |
17.0-21.0 |
14.5-16.5 |
21.0-23.5 |
|
Cobalt |
1.0 max |
... |
15.0-22.0 |
... |
... |
1.0 max |
2.5 max |
5.0 max |
|
Molybdenum |
15.5-17.4 |
7.00-9.50 |
2.0 max |
3.0-4.0 |
2.50-3.50 |
2.80-3.30 |
15.0-17.0 |
6.0-8.0 |
|
Columbium |
... |
2.75-4.00 |
... |
2.4-4.5 |
0.50 max |
4.75-5.50 |
... |
... |
|
Titanium |
... |
1.00-1.70 |
0.5-2.5 |
0.5-2.5 |
1.90-2.40 |
0.65-1.15 |
... |
... |
|
Aluminum |
0.5 max |
0.35 max |
0.2-2.0 |
0.01-0.7 |
0.10-0.50 |
2.20-0.80 |
... |
... |
|
Zirconium |
... |
... |
... |
... |
... |
... |
... |
... |
|
Boron |
0.006 max |
... |
0.0006–0.006 |
... |
... |
0.006 max |
... |
... |
|
Iron |
1.8 max |
RemainderB |
3.0 max |
RemainderB |
22.0 minA |
RemainderB |
4.0-7.0 |
18.0-21.0 |
|
Copper |
0.5 max |
... |
0.50 max |
1.5-3.0 |
1.50-3.00 |
0.30 max |
... |
1.5-2.5 |
|
Nickel |
RemainderB |
55.0–59.0 |
RemainderB |
45.0-55.0 |
38.0-46.0 |
50.0-55.0 |
RemainderB |
RemainderB |
|
Tantalum |
0.2 max |
... |
... |
... |
... |
... |
... |
... |
|
Tungsten |
0.8 max |
... |
... |
... |
... |
... |
3.0-4.5 |
1.5 max |
|
Columbium + |
... |
... |
0.50–2.5 |
... |
... |
... |
... |
0.50 max |
|
Vanadium |
... |
... |
... |
... |
... |
... |
0.35 max |
... |
1.2 Pipe and tube shall be supplied
in the cold worked or cold worked and precipitations hardened or
solution annealed plus precipitation hardened and descaled
conditions. When atmosphere control is used, descaling is not
necessary.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
|
Standard Test Methods for Tension Testing of Metallic Materials |
|
|
Standard Terminology Relating to Non-ferrous Metals and Alloys |
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
