ASTM B999-15

Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate

STANDARD published on 15.11.2015

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM B999-15
Note: WITHDRAWN
Publication date standards: 15.11.2015
SKU: NS-623533
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Metallic coatings

Annotation of standard text ASTM B999-15 :

Keywords:

conductive substrate, electrodeposited coatings, nonconductive substrate, titanium alloys, titanium-zirconium alloys,, ICS Number Code 25.220.40 (Metallic coatings)

Additional information

1. Scope

1.1 This specification covers the requirements for electrodeposited coatings of titanium and titanium-zirconium alloys on conductive and non-conductive substrates for engineering (functional) uses. The coatings of titanium-zirconium alloys are those that range in zirconium between 10wt% and 14wt% zirconium and are known as “terne” metallic electrodeposits.

1.2 This specification applies for both conductive (metallic) substrates and non-conductive (plastics, fibers, carbon foam, etc.)

1.3 Electrodeposits of titanium and titanium-zirconium alloys on aluminum and conductive substrate and nonconductive substrate are produced where it is desired to obtain atmospheric corrosion resistance. Deposits of titanium and titanium-zirconium alloys particularly on aluminum have shown to have excellent corrosion protective qualities in atmospheric exposure, especially when under-coated by electroless nickel. Titanium and titanium-zirconium alloy deposits provide corrosion protection from dilute sulfuric acid, are used for lining of brine refrigeration tanks, chemical equipment apparatus, storage batteries, and as a wear coating for bearing surfaces.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

B374-21	Standard Terminology Relating to Electroplating
B487-20	Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
B499-09(2021)e1	Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Includes all amendments and changes 5/18/2021).
B117-19	Standard Practice for Operating Salt Spray (Fog) Apparatus
B183-18(2022)	Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B504-90(2023)	Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
F519-23	Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
B507-14(2021)	Standard Practice for Design of Articles to Be Electroplated on Racks
B567-98(2021)	Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B568-98(2021)	Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B571-23	Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B602-21	Standard Guide for Attribute Sampling of Metallic and Inorganic Coatings
B322-99(2020)e1	Standard Guide for Cleaning Metals Prior to Electroplating (Includes all amendments and changes 12/7/2020).
B320-60(2019)	Standard Practice for Preparation of Iron Castings for Electroplating
B253-11(2022)	Standard Guide for Preparation of Aluminum Alloys for Electroplating
B697-88(2021)	Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
E127-20	Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks
D5185-18	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D3359-23	Standard Test Methods for Rating Adhesion by Tape Test
D2982-07(2019)	Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
B851-04(2020)	Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
B850-98(2022)	Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
B849-02(2023)	Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
B733-22	Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
B727-04(2020)	Standard Practice for Preparation of Plastics Materials for Electroplating
B242-99(2020)	Standard Guide for Preparation of High-Carbon Steel for Electroplating

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.