ASTM C121/C121M-09e1..
ASTM C1252-06
ASTM C1283-11
ASTM C1352/C1352M-09..
ASTM C1405-14
ASTM C1459-04(2014)..
Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM C1088-14
Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
STANDARD published on 1.2.2014
The information about the standard:
Designation standards: ASTM C1088-14
Note: WITHDRAWN
Publication date standards: 1.2.2014
SKU: NS-9402
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM C1088-14 :
Keywords:
appearance requirements, clay, fired masonry units, masonry, physical properties, shale, thin brick, ICS Number Code 91.100.15 (Mineral materials and products)
Additional information
| 1. Scope | ||||||
|
1.1 This specification covers thin veneer brick units made from clay, shale, fire clay, sand, or mixtures thereof, and fired to incipient fusion for use in adhered or fastened veneer applications. Three types of thin veneer brick units in each of two grades are covered. In this specification, the term thin veneer brick shall be understood to mean clay masonry unit with a maximum thickness of 13/4 in. (44.45 mm). 1.2 The property requirements of
this specification apply at the time of purchase. The use of
results from testing of brick extracted from masonry structures for
determining conformance or nonconformance to the property
requirements (Section 1.3 Brick covered by this
specification are manufactured from clay, shale, or similar
naturally occurring substances and subjected to a heat treatment at
elevated temperatures (firing). The heat treatment must develop
sufficient fired bond between the particulate constituents to
provide the strength and durability requirements of the
specification. (See “firing” and “fired bond” in Terminology
C1232.)
1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. |
||||||
| 2. Referenced Documents | ||||||
|
Similar standards:
Historical
1.4.2009
Historical
1.11.2006
Historical
1.11.2011
Historical
1.4.2009
Historical
1.2.2014
Historical
1.6.2014
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
