ASTM C110-05

Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

STANDARD published on 1.5.2005

Language
Format	Online Secure PDF - 125.00 USD Print design - 125.00 USD
Availability	IN STOCK
Price	125.00 USD excl. VAT
125.00 USD

The information about the standard:

Designation standards: ASTM C110-05
Note: WITHDRAWN
Publication date standards: 1.5.2005
SKU: NS-9490
The number of pages: 21
Approximate weight : 63 g (0.14 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM C110-05 :

Keywords:

apparent density, dry brightness, dry screening, fineness, lime putty, limestone grindability, particle size, slaking rate, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

Additional information

1. Scope

1.1 These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered in ASTM standards.

Note 1—Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and quicklime during sampling, storage, and testing (see Practice C 50).

1.2 The test procedures appear in the following order:

Section

Air Entrainment	8
Apparent Loose Density of Hydrated Lime, Pulverized Quicklime, and Limestone	19
Apparent Packed Density of Hydrated Lime, Pulverized Quicklime, and Limestone	20
Autoclave Expansion of Hydrated Lime	9
Dry Brightness of Pulverized Limestone	12
Dry Screening by Air Jet Sieve	18
Fineness of Pulverized Quicklime and Hydrated Lime by Air Permeability	16
Limestone Grindability	13
Particle Size of Pulverized Limestone	17
Plasticity of Lime Putty	6
Popping and Pitting of Hydrated Lime	10
Residue and Sieve Analysis	15
Settling Rate of Hydrated Lime	14
Slaking Rate of Quicklime	11
Specific Gravity of Hydrated Lime Products	21
Standard Consistency of Lime Putty	5
Water Retention of Hydrated Lime	7
Wet Sieve Analysis of Agricultural Liming Materials	22

1.3 The values stated in SI units are to be regarded as the standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

C28/C28M-26	Standard Specification for Gypsum Plasters
C472-20	Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
C430-25	Standard Test Method for Fineness of Hydraulic Cement by the 45-?m (No. 325) Sieve
C305-20	Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C231-09	Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C230/C230M-23	Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
C207-24	Standard Specification for Hydrated Lime for Masonry Purposes
C204-25	Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C192/C192M-26	Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C188-26	Standard Test Method for Density and Relative Density of Hydraulic Cement
C185-20	Standard Test Method for Air Content of Hydraulic Cement Mortar
C595-08	Standard Specification for Blended Hydraulic Cements
C51-26	Standard Terminology Relating to Lime and Limestone (as Used by the Industry)
C91-05	Standard Specification for Masonry Cement
C109/C109M-24	Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube Specimens)
C136-06	Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C50-00	Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C670-24ae1	Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials (Includes all amendments and changes 2/21/2025).
C702-98	Standard Practice for Reducing Samples of Aggregate to Testing Size
C778-21	Standard Specification for Standard Sand
C1005-20	Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
C1107-05	Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
D75-03	Standard Practice for Sampling Aggregates
E11-24	Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E177-26a	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods (Includes all amendments and changes 5/14/2026).
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
C150-07	Standard Specification for Portland Cement

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.