ASTM C1184-23

Standard Specification for Structural Silicone Sealants

Translate name

STANDARD published on 1.5.2023

Language
Format	PDF - Immediate download - 55.00 USD PDF + redline - Immediate - 66.00 USD Print design - 55.00 USD Print + redline - 66.00 USD
Availability	IN STOCK
Price	55.00 USD excl. VAT
55.00 USD

The information about the standard:

Designation standards: ASTM C1184-23
Publication date standards: 1.5.2023
SKU: NS-1144996
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Binders. Sealing materials

Annotation of standard text ASTM C1184-23 :

This specification describes the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant. These sealants are intended to structurally adhere components of structural sealant glazing systems. Sealants shall be classified as to types and uses: Type S; Type M; Use G; and Use O. The physical, mechanical, and performance properties of the sealant shall conform to the requirements described. The following test methods shall be performed: rheological properties; extrudability; hardness; heat aging; tack-free time; tensile adhesion; and shelf life.

Keywords:
ICS Number Code 91.100.50 (Binders. Sealing materials)

Additional information

1. Scope

1.1?This specification covers the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant. These sealants are intended to structurally adhere components of structural sealant glazing systems.

1.2?Only those properties for which there are industry-agreed-upon minimum acceptable requirements, as determined by available ASTM test methods, are described in this specification. Additional properties may be added as ASTM test methods for those properties become available.

1.3?The values stated in metric (SI) units are to be regarded as the standard. The values in parentheses are for information only.

1.4?Committee C24, with jurisdiction over this specification, is aware of two comparable standards by other organizations: ETAG No. 002 and the Chinese national standard GB16776.

Note 1:?ETAG 002 is currently no longer supported.

1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

G151-19	Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G154-23	Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
G155-21	Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
ETAG No. 002	Guideline for European Technical Approval for Structural Sealant Glazing Systems
C792-23	Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C794-18(2022)	Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C1087-23	Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C639-15(2020)	Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C661-15(2022)	Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C679-15(2022)	Standard Test Method for Tack-Free Time of Elastomeric Sealants
C717-19	Standard Terminology of Building Seals and Sealants
C1135-19	Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1401-23	Standard Guide for Structural Sealant Glazing
C1442-14(2021)	Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C603-14(2019)	Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.