ASTM C1401-07

Standard Guide for Structural Sealant Glazing

STANDARD published on 1.11.2007

Language
Format	Online Secure PDF - 136.00 USD Print design - 136.00 USD
Availability	IN STOCK
Price	136.00 USD excl. VAT
136.00 USD

The information about the standard:

Designation standards: ASTM C1401-07
Note: WITHDRAWN
Publication date standards: 1.11.2007
SKU: NS-11082
The number of pages: 55
Approximate weight : 165 g (0.36 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM C1401-07 :

Keywords:

construction-site glazing, curtain wall, glazing, shop glazing, silicone sealant, structural sealant, structural sealant glazing, SSG, ICS Number Code 91.100.50 (Binders. Sealing materials)

Additional information

1. Scope

1.1 Structural sealant glazing, hereinafter referred to as SSG, is an application where a sealant not only can function as a barrier against the passage of air and water through a building envelope, but also primarily provides structural support and attachment of glazing or other components to a window, curtain wall, or other framing system.

1.2 This guide provides information useful to design professionals, manufacturers, contractors, and others for the design and installation of a SSG system. This information is applicable only to this glazing method when used for a building wall that is not more than 15° from vertical; however, limited information is included concerning a sloped SSG application.

1.3 Only a silicone chemically curing sealant specifically formulated, tested, and marketed for structural sealant glazing is acceptable for a SSG system application.

1.4 The committee with jurisdiction for this standard is not aware of any comparable standard published by other organizations.

1.5 The calculations and values stated in SI units are to be regarded as the standard. Values in parenthesis and inch-pound units are for information only. SI units in this guide are in conformance with IEEE/ASTM SI 10.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

C1294-20(2024)	Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1330-23	Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1369-25	Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1392-20	Standard Guide for Evaluating Failure of Structural Sealant Glazing
C1394-20(2026)	Standard Guide for In-Situ Structural Silicone Glazing Evaluation
E631-15(2024)	Standard Terminology of Building Constructions
E783-02(2018)	Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E1105-15(2023)	Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
IEEE/ASTM SI 10	Standard for Use of the International System of Units (SI): The Modern Metric System
Aluminum Design Manual Available from the Aluminum Association, 900 19th St., N.W. Washington, DC 20006.	?
Z97.1	Safety Performance Specifications and Methods of Test for Glazing Materials Used in Buildings
16 CFR 1201	Standard on Architectural Glazing Materials Available from the Consumer Product Safety Commission (CPSC), Washington, D.C. 20207.
E1825-24	Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems
E1886-19	Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E2099-23	Standard Practice for Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2431-12(2020)	Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
G15-08	Standard Terminology Relating to Corrosion and Corrosion Testing (Withdrawn 2010)
E1300-24	Standard Practice for Determining Load Resistance of Glass in Buildings
E1425-14(2023)	Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
C510-16(2022)	Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C568-08	Standard Specification for Limestone Dimension Stone
C615-03	Standard Specification for Granite Dimension Stone
C99-08	Standard Test Method for Modulus of Rupture of Dimension Stone
C119-24	Standard Terminology Relating to Dimension Stone
C162-23	Standard Terminology of Glass and Glass Products
C503-08	Standard Specification for Marble Dimension Stone
C509-06(2021)	Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
B117-26	Standard Practice for Operating Salt Spray (Fog) Apparatus
C794-18(2022)	Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C717-26	Standard Terminology of Building Seals and Sealants
C719-22	Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C864-05(2026)	Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C880-06	Standard Test Method for Flexural Strength of Dimension Stone
C1472-16(2022)	Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1487-19(2024)	Standard Guide for Remedying Structural Silicone Glazing
C1521-19(2025)	Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1564-20(2024)	Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
D1566-21a	Standard Terminology Relating to Rubber (Includes all amendments and changes 11/10/2021).
D2203-01(2023)	Standard Test Method for Staining from Sealants
C920-18(2024)	Standard Specification for Elastomeric Joint Sealants
C1036-25	Standard Specification for Flat Glass
C1048-18	Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
C1087-23	Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1115-17(2026)	Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1135-19(2024)	Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1172-24e1	Standard Specification for Laminated Architectural Flat Glass (Includes all amendments and changes 12/4/2025).
C1184-23	Standard Specification for Structural Silicone Sealants
C1193-25	Standard Guide for Use of Joint Sealants
C1201-91(1996)	Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1248-22	Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1249-18(2023)	Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1253-14(2019)	Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1265-22	Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
E1233-06	Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
E1424-22	Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1996-23	Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E2128-20	Standard Guide for Evaluating Water Leakage of Building Walls
E2203-14(2025)	Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
501.1	Standard Test Method for Metal Curtain Walls for Water Penetration Using Dynamic Pressure Available from the Architectural Aluminum Manufacturers Association (AAMA).
TIR-A11–1996	Maximum Allowable Deflection of Framing Systems for Building Cladding Components at Design Wind Loads
501.2	Field Check of Metal Curtain Walls for Water Leakage
D4541-22	Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
E283-04	Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E330-02	Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E331-00(2023)	Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E547-00(2024)	Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.