ASTM C1534-07e1

Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems (Includes all amendments And changes 3/19/2012).

Automatically translated name:

Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

STANDARD published on 1.9.2007

Language
Format	Online Secure PDF - 77.00 USD Print design - 77.00 USD
Availability	IN STOCK
Price	77.00 USD excl. VAT
77.00 USD

The information about the standard:

Designation standards: ASTM C1534-07e1
Note: WITHDRAWN
Publication date standards: 1.9.2007
SKU: NS-11742
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM C1534-07e1 :

Keywords:

closed cell, ducts, flexible, foam, HVAC, insulation, open cell, sound absorbing, thermal insulation, Ducts/duct liners, Foam thermal insulating materials, Conditioning atmospheres, Polymers--specifications, Thermal insulating materials--specifications, Unfaced thermal insulation--specifications, ICS Number Code 91.100.60 (Thermal and sound insulating materials)

Additional information

1. Scope

1.1 This specification covers the composition, dimensions, and physical properties of flexible unfaced foam sheet, used to insulate interior surfaces of HVAC ducts, plenums and equipment used for the distribution of conditioned air with a temperature of up to 250°F (121°C).

1.2 HVAC ducts, plenums and equipment systems typically operate between a temperature range of 50°F to 150°F (10°C to 65°C) and are designed to meet building code requirements of maximum temperatures of 250°F (121°C).

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are in SI, and are for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents

C1045-19	Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C423-23e1	Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method (Includes all amendments and changes 8/9/2024).
C390-08(2024)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C209-20	Standard Test Methods for Cellulosic Fiber Insulating Board
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
C665-24	Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C634-22	Standard Terminology Relating to Building and Environmental Acoustics
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C411-19	Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C1104/C1104M-19(2025)	Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1114-06(2019)	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1304-23	Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1338-25	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
E84-26a	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026).
E176-24a	Standard Terminology of Fire Standards (Includes all amendments and changes 12/9/2024).
E795-23	Standard Practices for Mounting Test Specimens During Sound Absorption Tests
E2231-26	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
G21-15(2021)e1	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi (Includes all amendments and changes 6/22/2021).
CAN/ULC-S102	Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies
C168-25	Standard Terminology Relating to Thermal Insulation
C1071-25	Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.