ASTM C1707-18

Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

Translate name

STANDARD published on 1.10.2018

Language
Format	PDF - Immediate download - 55.00 USD PDF + redline - Immediate - 66.00 USD Print design - 55.00 USD Print + redline - 66.00 USD
Availability	IN STOCK
Price	55.00 USD excl. VAT
55.00 USD

The information about the standard:

Designation standards: ASTM C1707-18
Publication date standards: 1.10.2018
SKU: NS-904605
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Cement. Gypsum. Lime. Mortar

Annotation of standard text ASTM C1707-18 :

This specification covers four types of pozzolanic hydraulic lime for structural purposes which include use in mortar, scratch, brown, and finish (stucco) coats of interior or exterior plaster. The four types of pozzolanic hydraulic lime are classified according to the minimum hydrated lime content, maximum hydraulic cement content, and specific performance requirements. Test specimens shall be stored in a moist room or cabinet wherein the storage surface shall be in equilibrium with the space to ensure no moisture loss. The specimens shall be subjected to testing to determine conformance to the following requirements: water soluble alkali, sulfur trioxide content, carbon dioxide content, fineness, maximum time of initial and final set, autoclave expansion, air content, water retention, and compressive strength.

Keywords:
hydrated lime, mortar, plaster grout, pozzolan, pozzolanic hydraulic lime,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

Additional information

1. Scope

1.1 This standard covers four types of pozzolanic hydraulic lime for structural purposes which include use in mortar, scratch, brown, and finish (stucco) coats of interior or exterior plaster.

1.1.1 PHL—Pozzolanic hydraulic lime for use in mortar, scratch, brown, and finish (stucco) coats of interior or exterior plaster.

1.1.2 PHL_c—PHL with a maximum 20 % binder weight of hydraulic cement.

1.1.3 PHL-A—Air-entrained PHL.

1.1.4 PHL_c-A—Air-entrained PHL_{1.2 The values stated in SI units are to
be regarded as standard.}

1.3 This specification classifies pozzolanic hydraulic lime by minimum hydrated lime content, maximum hydraulic cement content, and specific performance requirements.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C50-00	Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51-23	Standard Terminology Relating to Lime and Limestone (as Used by the Industry)
C109/C109M-23	Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube Specimens)
C110-20	Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C114-23	Standard Test Methods for Chemical Analysis of Hydraulic Cement
C150-07	Standard Specification for Portland Cement
C207-18	Standard Specification for Hydrated Lime for Masonry Purposes
C266-21	Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C270-19ae1	Standard Specification for Mortar for Unit Masonry (Includes all amendments and changes 1/4/2024).
C305-20	Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C511-21	Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C595-08	Standard Specification for Blended Hydraulic Cements
C778-21	Standard Specification for Standard Sand
C1157-08	Standard Performance Specification for Hydraulic Cement
C25-19	Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.