ASTM C240-18

Standard Test Methods for Testing Cellular Glass Insulation Block

Translate name

STANDARD published on 1.4.2018

Language
Format	PDF - Immediate download - 66.00 USD Print design - 66.00 USD
Availability	IN STOCK
Price	66.00 USD excl. VAT
66.00 USD

The information about the standard:

Designation standards: ASTM C240-18
Note: WITHDRAWN
Publication date standards: 1.4.2018
SKU: NS-845250
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Thermal and sound insulating materials

Annotation of standard text ASTM C240-18 :

Keywords:
breaking load, breaking strength, cellular materials, compressive strength, flexural strength, thermal insulating materials-glass, water absorption,, ICS Number Code 91.100.60 (Thermal and sound insulating materials)

Additional information

Significance and Use

4.1 From a general standpoint, these test methods outline the particular points which have to be taken into account when applying ASTM standard test methods to the case of cellular glass insulating block.

1. Scope

1.1 These test methods cover the testing of cellular glass insulation block for density, water absorption, compressive strength, flexural strength at ambient temperature; preparation for chemical analysis; and thermal conductivity measurements.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C168-22	Standard Terminology Relating to Thermal Insulation
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
NRC 1.36	Nonmetallic Thermal Insulation for Austenitic Stainless Steel Available from Director of Regulatory Standards, US Atomic Energy Commission, Washington, DC 20545.
MIL-I-24244	Specification Insulation Materials with Special Corrosion, Chloride, and Fluoride Requirements Available from DLA Document Services, Building 4/D, 700 Robbins Ave., Philadelphia, PA 19111-5094, http://quicksearch.dla.mil.
ISO 3951	Sampling Procedure and Charts for Inspection by Variables for Percent Nonconforming Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
D4869/D4869M-16a(2021)	Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing (Includes all amendments and changes 1/6/2021).
D226/D226M-17(2023)	Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
C871-18(2023)	Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C390-08(2019)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C165-23	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C303-21	Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
C203-22	Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.