ASTM C240-97

Standard Test Methods of Testing Cellular Glass Insulation Block

STANDARD published on 10.9.1997

Language
Format	Online Secure PDF - 77.00 USD Print design - 77.00 USD
Availability	IN STOCK
Price	77.00 USD excl. VAT
77.00 USD

The information about the standard:

Designation standards: ASTM C240-97
Note: WITHDRAWN
Publication date standards: 10.9.1997
SKU: NS-12691
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM C240-97 :

Keywords:

breaking load, breaking strength, cellular materials, compressive strength, flexural strength, thermal insulating materials-glass, water absorption

Additional information

1. Scope

1.1 These test methods cover the testing of cellular glass insulation block for density, water absorption, compressive strength, flexural strength at ambient temperature; preparation for chemical analysis; and thermal conductivity measurements.

1.2 The values stated in SI are generally to be regarded as the standard. The SI dimensions are to be used for material supplied in metric sizes. The inch dimensions are to be used for material supplied in inch sizes.

1.3 This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

C168-25	Standard Terminology Relating to Thermal Insulation
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
NRC 1.36	Nonmetallic Thermal Insulation for Austenitic Stainless Steel Available from Director of Regulatory Standards, US Atomic Energy Commission, Washington, DC 20545.
MIL-I-24244	Specification Insulation Materials with Special Corrosion, Chloride, and Fluoride Requirements Available from DLA Document Services, Building 4/D, 700 Robbins Ave., Philadelphia, PA 19111-5094, http://quicksearch.dla.mil.
ISO 3951	Sampling Procedure and Charts for Inspection by Variables for Percent Nonconforming Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
D4869/D4869M-16a(2025)	Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing (Includes all amendments and changes 12/8/2025).
D226/D226M-25	Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
C871-18(2023)	Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C390-08(2024)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C165-23	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C303-21	Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
C203-22	Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.