ASTM C361-19

Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

Translate name

STANDARD published on 1.4.2019

Language
Format	Online Secure PDF - 125.00 USD Print design - 125.00 USD
Availability	IN STOCK
Price	125.00 USD excl. VAT
125.00 USD

The information about the standard:

Designation standards: ASTM C361-19
Note: WITHDRAWN
Publication date standards: 1.4.2019
SKU: NS-951204
The number of pages: 29
Approximate weight : 87 g (0.19 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Pipes and fittings of other materials

Annotation of standard text ASTM C361-19 :

Keywords:

ICS Number Code 23.040.50 (Pipes and fittings of other materials)

Additional information

1. Scope

1.1 This specification covers reinforced concrete pipe intended to be used for the construction of pressure pipelines with low internal hydrostatic heads generally not exceeding 125 ft.

1.2 This specification is the inch-pound companion to Specification C361; therefore, no SI equivalents are presented in the specification.

Note 1: Field tests on completed portions of the pipeline are not covered by this specification for the manufacture of the pipe but should be included in specifications for pipe laying.

1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C150/C150M-24	Standard Specification for Portland Cement
A36/A36M-19	Standard Specification for Carbon Structural Steel
C309-25	Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C497M-20	Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
C595/C595M-25	Standard Specification for Blended Hydraulic Cements
C618-25a	Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Includes all amendments and changes 4/3/2025).
	1012 Available from American Iron and Steel Institute (AISI), 1140 Connecticut Ave., NW, Suite 705, Washington, DC 20036, http://www.steel.org.
ASCE 15-93
ACI Code 318	Standard Building Code Requirements for Reinforced Concrete Available from American Concrete Institute (ACI), P.O. Box 9094, Farmington Hills, MI 48333-9094, http://www.concrete.org.
C655-19a(2025)	Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Includes all amendments and changes 9/29/2025).
C822-21	Standard Terminology Relating to Concrete Pipe and Related Products
C1602/C1602M-22	Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C1619-23	Standard Specification for Elastomeric Seals for Joining Concrete Structures
D698-12(2021)	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
D4253-16	Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4254-16	Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density (Withdrawn 2025)
A1011/A1011M-25	Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High-Strength
A1064/A1064M-24	Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
C31/C31M-26a	Standard Practice for Making and Curing Concrete Test Specimens in the Field (Includes all amendments and changes 3/3/2026).
C33/C33M-24a	Standard Specification for Concrete Aggregates (Includes all amendments and changes 11/18/2024).
C39/C39M-26	Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
A1008/A1008M-26	Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
A675/A675M-14(2025)	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A706/A706M-26	Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
A27/A27M-20	Standard Specification for Steel Castings, Carbon, for General Application
A283/A283M-24	Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A575-20	Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576-25	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A615/A615M-26	Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
C260/C260M-24	Standard Specification for Air-Entraining Admixtures for Concrete

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.