ASTM C465-19

Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

Translate name

STANDARD published on 1.4.2019

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM C465-19
Note: WITHDRAWN
Publication date standards: 1.4.2019
SKU: NS-945462
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Cement. Gypsum. Lime. Mortar

Annotation of standard text ASTM C465-19 :

Keywords:

additions, hydraulic cements, processing,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

Additional information

1. Scope

1.1 This specification pertains to the criteria and tests to be used for determining whether a(n) organic or inorganic processing addition, when used in the recommended amount at the option of the cement producer in the manufacture of hydraulic cements, meets the requirements as prescribed by definition in Specifications C150/C150M, C1157/C1157M, C845/C845M, and C595/C595M. The materials listed in the following former ASTM Specifications shall be considered as meeting the organic processing additions requirements of this specification:

C150/C150M – 62, for Portland Cement

C205 – 58 T, for Portland Blast-Furnace Slag Cement

C340 – 58 T, for Portland Pozzolan Cement

C358 – 58, for Slag Cement

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C596-23	Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
D891-18	Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
E203-24	Standard Test Method for Water Using Volumetric Karl Fischer Titration
C845-04	Standard Specification for Expansive Hydraulic Cement
C1157-08	Standard Performance Specification for Hydraulic Cement
C192/C192M-19	Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C205-67	Specification for Portland Blast-Furnace Cement (Withdrawn 1967)
C226-22	Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C231-09	Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C293-08	Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C340-67	Specification for Portland-Pozzolan Cement (Withdrawn 1967)
C204-24	Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C358-66	Specification for Slag Cement (Withdrawn 1967)
C595-08	Standard Specification for Blended Hydraulic Cements
C617-10	Standard Practice for Capping Cylindrical Concrete Specimens
C191-21	Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C39/C39M-23	Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C78-09	Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C109/C109M-23	Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube Specimens)
C114-23	Standard Test Methods for Chemical Analysis of Hydraulic Cement
C115-10	Standard Test Method for Fineness of Portland Cement by the Turbidimeter
C138/C138M-23	Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C33-07	Standard Specification for Concrete Aggregates
C143/C143M-20	Standard Test Method for Slump of Hydraulic-Cement Concrete
C150-07	Standard Specification for Portland Cement
C151-05	Standard Test Method for Autoclave Expansion of Hydraulic Cement
C173/C173M-24	Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C185-20	Standard Test Method for Air Content of Hydraulic Cement Mortar
C187-23	Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.