ASTM C475/C475M-17(2022)

Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

Translate name

STANDARD published on 1.6.2022

Language
Format	PDF - Immediate download - 55.00 USD Print design - 55.00 USD
Availability	IN STOCK
Price	55.00 USD excl. VAT
55.00 USD

The information about the standard:

Designation standards: ASTM C475/C475M-17(2022)
Publication date standards: 1.6.2022
SKU: NS-1064822
The number of pages: 2
Approximate weight : 6 g (0.01 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Cement. Gypsum. Lime. Mortar

Annotation of standard text ASTM C475/C475M-17(2022) :

This specification covers all-purpose, taping and finishing joint compounds, paper joint tape and glass-mesh joint tape. No cracks in the thinner half of the wedge and no deep fissure cracks in the thicker half of the wedge. Other physical properties such as putrefaction, shrinkage, joint tape, width, thickness and tensile strength shall also be determined. Tests such as dimensional stability test, assembly of taping or all-purpose compound and joint-tape test, bond test, edge cracking test, and skewness test are required for paper joint-tape.

Keywords:
all-purpose compound, bond, check cracking, dimensional stability, edge cracking, finishing compound, glass-mesh joint tape, joint compound, joint tape, paper joint tape, putrefaction, shrinkage, taping compound, tensile strength, topping compound ,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)

Additional information

1. Scope

1.1?This specification covers all-purpose, taping and finishing joint compounds, paper joint tape, and glass-mesh joint tape.

1.1.1?The joint materials used in this standard are designed to be used with gypsum board installed in accordance with Specification C840.

1.2?This specification also covers the minimum requirements for an assembly of taping and all-purpose compound and joint tape.

1.3?The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.4?The values stated in either inch-pound or SI (metric) units are to be regarded separately as standard. Within the text, the SI units are shown in parentheses. The values stated in each system shall be used independent of the other. Values from the two systems shall not be combined.

1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

C474-15(2020)	Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
C11-23	Standard Terminology Relating to Gypsum and Related Building Materials and Systems
F1615-19(2024)	Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
D123-23	Standard Terminology Relating to Textiles
D3882-08(2020)	Standard Test Method for Bow and Skew in Woven and Knitted Fabrics
C840-23	Standard Specification for Application and Finishing of Gypsum Board

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.