ASTM C612-00

Standard Specification for Mineral Fiber Block and Board Thermal Insulation

STANDARD published on 10.11.2000

Language
Format	Online Secure PDF - 86.00 USD Print design - 86.00 USD
Availability	IN STOCK
Price	86.00 USD excl. VAT
86.00 USD

The information about the standard:

Designation standards: ASTM C612-00
Note: WITHDRAWN
Publication date standards: 10.11.2000
SKU: NS-14249
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM C612-00 :

Keywords:

block, board, high temperature, mineral fiber insulation, rock fiber, shot, shot content, slag fiber, ICS Number Code 91.100.60 (Thermal and sound insulating materials)

Additional information

1. Scope

1.1 This specification covers the classification, composition, dimension, and physical properties of mineral fiber (rock, slag, or glass) semirigid and rigid board insulation for the use on cooled surfaces and on heated surfaces up to 1800^oF (982^oC). For specific applications, the maximum and minimum temperature limits shall be agreed upon between the supplier and the purchaser.

1.2 The orientation of the fibers within the boards is primarily parallel to the principal surface (face). This specification does not cover fabricated pipe and tank wrap insulation where the insulation has been cut and fabricated to provide a fiber orientation that is perpendicular to the principal large surface (face).

1.3 For satisfactory performance, properly installed protective vapor retarders must be used in low-temperature (below ambient) applications to prevent movement of water vapor through or around the insulation towards the colder surface.

1.4 The values stated in inch-pound units are to be regarded as the standard. The SI equivalents of inch-pound units are given in parentheses for information only and may be approximate.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

C447-15(2022)	Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C165-23	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C795-08(2023)	Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C921-10	Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C1045-19	Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1136-23	Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
E84-26a	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026).
CAN/ULC-S102	Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies Available from Underwriters Laboratories of Canada, 7 Crouse Road, Scarborough, Ontario, Canada M1R 3A9.
C168-25	Standard Terminology Relating to Thermal Insulation
C303-21	Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
C356-22	Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C390-08(2024)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C1101/C1101M-23	Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
C411-19	Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C665-24	Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C680-23a	Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs (Includes all amendments and changes 12/13/2023).
C1058-03	Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1335-23	Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1338-25	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1617-24	Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel
C1104/C1104M-19(2025)	Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1114-06(2019)	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1304-23	Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.