ASTM D1014-95

Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel

STANDARD published on 1.1.1995

Language
Format	Online Secure PDF - 77.00 USD Print design - 77.00 USD
Availability	IN STOCK
Price	77.00 USD excl. VAT
77.00 USD

The information about the standard:

Designation standards: ASTM D1014-95
Note: WITHDRAWN
Publication date standards: 1.1.1995
SKU: NS-16073
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D1014-95 :

Keywords:

Exterior exposure tests, Outdoor weathering, conducting exterior exposure tests of (exterior) paints on steel, test, ICS Number Code 87.040 (Paints and varnishes)

Additional information

1. Scope

1.1 This practice covers the determination of the relative service of exterior paints and other materials of similar purpose when applied on steel surfaces exposed out-of-doors.

1.2 Experience indicates that the steel used as a test surface has a marked bearing upon the weathering results. It is the purpose of this test method to minimize the influence of variation in steel surfaces on any series of tests by providing for uniformity in the selection of the steel surface, particularly in cooperative work. This practice also outlines uniform procedures for conducting the exposure tests and for evaluating and recording results.

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D2200-26	Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
D609-17(2022)	Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
G7-05	Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
G113-24	Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
A36/A36M-19	Standard Specification for Carbon Structural Steel
A283/A283M-24	Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
D610-25	Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
D660-93(2019)	Standard Test Method for Evaluating Degree of Checking of Exterior Paints
D661-93(2019)	Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
D662-93(2019)	Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
D1212-91(2025)	Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
D3359-23	Standard Test Methods for Rating Adhesion by Tape Test
D4214-23	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D7091-22	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
E41-92(1998)	Terminology Relating to Conditioning
E1347-06(2020)	Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
G141-09(2021)	Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
G147-24	Standard Practice for Conditioning and Handling of Materials for Natural and Artificial Weathering Tests
SSPC Method 1	Test Panel Preparation Method No 1, Uncontaminated Rusted Steel SSPC Available from Society for Protective Coatings (SSPC), 40 24th St., 6th Floor, Pittsburgh, PA 15222-4656, http://www.sspc.org.
D2201-23	Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
D2244-25	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
D772-24	Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
D823-18(2022)	Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
D1654-24e1	Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments (Includes all amendments and changes 7/2/2026).
D1729-22	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
D1730-09(2020)	Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
D2616-25	Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
D2803-09(2020)	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
B209-14	Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B449-93(2022)	Standard Specification for Chromates on Aluminum
D523-25	Standard Test Method for Specular Gloss
D714-25	Standard Test Method for Evaluating Degree of Blistering of Paints

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.