We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
Translate name
STANDARD published on 1.10.2016
Designation standards: ASTM D1218-12(2016)
Note: WITHDRAWN
Publication date standards: 1.10.2016
SKU: NS-667273
The number of pages: 7
Approximate weight : 21 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
refractive dispersion, refractive index, refractometer,, ICS Number Code 75.080 (Petroleum products in general)
Significance and Use | ||||||||||||
5.1 Refractive index and refractive dispersion are fundamental physical properties, which can be used in conjunction with other properties to characterize pure hydrocarbons and their mixtures. |
||||||||||||
1. Scope | ||||||||||||
1.1 This test method covers the measurement of refractive index, accurate to four decimal places or better, of transparent and light-colored hydrocarbons in the range of 1.3300 to 1.5000 at temperatures from 20 °C to 30 °C by manual (optical-mechanical) or automatic (digital) procedure. 1.2 The manual (optical-mechanical) procedure also covers the measurement of refractive dispersion accurate to the fourth decimal place or better. Note 1: The test method may be suitable for measuring the
refractive indices of liquids above 1.5000 and at temperatures both
below 20 °C and above 30 °C; however, the test method precision may
not apply. Verification of the accuracy of such measurements will
depend upon the availability of reliable, certified reference
standards that demonstrate the performance of the instrument used
under the particular measuring conditions.
1.3 The test method may not be applicable to liquids that are strongly colored, or that have bubble points so near the test temperature that a reading cannot be obtained before substantial weathering takes place. Liquid color should be limited to No. 4 ASTM Color or lighter, as determined by Test Method D1500. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-05-06 (Number of items: 2 897 584)
© Copyright 2024 NORMSERVIS s.r.o.