ASTM D1879-99

Standard Practice for Exposure of Adhesive Specimens to High-Energy Radiation

STANDARD published on 10.10.1999

Language
Format	Online Secure PDF - 77.00 USD Print design - 77.00 USD
Availability	IN STOCK
Price	77.00 USD excl. VAT
77.00 USD

The information about the standard:

Designation standards: ASTM D1879-99
Note: WITHDRAWN
Publication date standards: 10.10.1999
SKU: NS-18643
The number of pages: 4
Approximate weight : 12 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D1879-99 :

Keywords:

Adhesive joints-exposure, Adhesives-polymeric, Beta irradiation, Destructive testing-irradiation, Gamma radiation, Irradiance/irradiation, Molecular structure, Plast (general)-adhesive-bonded, Plast (thermoplastic), Plast (thermosetting), Polymers-nuclear applications, Radiation exposure-adhesives, Radiation exposure-nuclear materials/applications, Structural applications-adhesives, X-irradiation, polymeric adhesives-exposure in bonded specimens to high-energy, radiation, test

Additional information

1. Scope

1.1 The purpose of this practice is to define conditions for the exposure of polymeric adhesives in bonded specimens to high-energy radiation prior to determination of radiation-induced changes in physical or chemical properties. This recommended practice specifically covers the following kinds of radiation: gamma or X-ray radiation, electron or beta radiation, neutrons, and mixtures of these such as reactor radiation.

1.2 This practice specifies only the conditions of irradiation but does not cover the preparation of test specimens, testing conditions, or the evaluation of test. These are covered in the various ASTM methods or specifications for specific materials.

1.3 This practice covers procedures for the following five types of exposure: Procedure A -Exposure at ambient conditions. Procedure B -Exposure at controlled temperature. Procedure C -Exposure in a medium other than air. Procedure D- Exposure under load. Procedure E- Exposure combining two or more of the variables listed in Procedures A to D.

Note 1-The problems of measuring the properties of materials during irradiation involve shielding and remote control facilities and are, therefore, not considered in this practice.

2. Referenced Documents

E261-16(2021)	Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
E666-21	Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation
E720-23	Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
E2005-21	Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ISO/ASTM 51261	Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
ISO/ASTM 51649	Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
ISO/ASTM 51818	Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
D618-21	Standard Practice for Conditioning Plastics for Testing
D907-15(2023)	Standard Terminology of Adhesives
D1672-59T(1971)	Recommended Practices for Exposure of Polymeric Materials to High-Energy Radiation (Withdrawn 1983)
D2953-71	Classification System for Polymeric Materials for Service in Ionizing Radiation (Withdrawn 1984)
E170-24	Standard Terminology Relating to Radiation Measurements and Dosimetry
ISO/ASTM 51702	Practice for Dosimetry in Gamma Irradiation Facilities for Radiation Processing

We recommend:

Technical standards updating

Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.

Would you like to know more? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.