ASTM D4950-95(2000)e1

Standard Classification and Specification of Automotive Service Greases (Includes all amendments And changes 8/16/2017).

Automatically translated name:

Standard Classification and Specification of Automotive Service Greases

STANDARD published on 10.11.2001

Language
Format	Online Secure PDF - 86.00 USD Print design - 86.00 USD
Availability	IN STOCK
Price	86.00 USD excl. VAT
86.00 USD

The information about the standard:

Designation standards: ASTM D4950-95(2000)e1
Note: WITHDRAWN
Publication date standards: 10.11.2001
SKU: NS-29258
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

Annotation of standard text ASTM D4950-95(2000)e1 :

Keywords:

automotive grease categories, automotive service grease, chassis grease, multipurpose automotive grease, NLGI, chassis and wheel bearing service classification, NLGI grease classification, wheel bearing grease, ICS Number Code 75.100 (Lubricants, industrial oils and related products)

Additional information

1. Scope

1.1 This specification covers lubricating greases suitable for the periodic relubrication of chassis systems and wheel bearings of passenger cars, trucks, and other vehicles.

1.2 This specification defines the requirements used to describe the properties and performance characteristics of chassis greases and wheel bearing greases for service-fill applications.

1.3 The test requirements (acceptance limits) given in this specification are, as the case may be, minimum or maximum acceptable values for valid duplicate test results. No additional corrections for test precision, such as described in Practice D3244, are to be applied inasmuch as the precision of the test methods was taken into account in the determination of the requirements.

1.4 The values stated in SI units are to be regarded as the standard. The values given in inch-pound units are for information only.

2. Referenced Documents

AMS 3217/3B	Test Slabs Chloroprene (CR)-65-75
SAE J310	Automotive Lubricating Greases
AMS 3217A	Standard Elastomer Stock-Test Slabs
AMS 3217/2C	Test Slabs, Acrylonitrile Butadiene (NBR-L)-Low Acrylonitrile, 65-75 With respect to elastomer AMS 3217/2B, the elastomer specification has been superseded by AMS 3217/2C. Per SAE, the 2A and 2B elastomers were identical, however the synthetic lubricant immersion fluid used to reference the elastomer has been exchanged from ARM-200 to AMS 3021. Reference fluid AMS 3021 better represents current market aviation fluids. Elastomers 2B and 2C were compared using NLGI GC-LB reference greases batch 1 and 2 and were found to give similar results.
D1743-22	Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
D3244-24	Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
D4693-07(2021)	Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
D4290-20	Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
D2596-26	Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
D217-21a	Standard Test Methods for Cone Penetration of Lubricating Grease (Includes all amendments and changes 12/20/2021).
D4289-24a	Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids (Includes all amendments and changes 8/2/2024).
D566-20	Standard Test Method for Dropping Point of Lubricating Grease (Withdrawn 2023)
D1742-24	Standard Test Method for Oil Separation from Lubricating Grease During Storage
D2265-22	Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
D2266-23	Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
D1264-24a	Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases (Includes all amendments and changes 12/25/2024).
D3527-23	Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
D4170-24	Standard Test Method for Fretting Wear Protection by Lubricating Greases
D4175-24e2	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants (Includes all amendments and changes 6/9/2026).

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.

Here you can customize your cookie settings according to your preferences.

We need your consent to use the individual data so that you can see information about your interests, among other things.