We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
STANDARD published on 1.11.2013
Designation standards: ASTM D4967-99(2013)
Note: WITHDRAWN
Publication date standards: 1.11.2013
SKU: NS-29326
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
acrylates, aramids, fluoroplastics, glass fibers, glass-fibers reinforced plastics, grease and similar materials, nylon, polybutylene, polycarbonate, polyester tape, polyethylene, polyimide tape, polypropylene, polyurethane, poly(vinyl chloride), rubber, silicone rubber, steel, thermoplastic elastomer, thermoplastic polyester, ICS Number Code 33.180.01 (Fibre optic systems in general),33.180.10 (Fibres and cables)
Significance and Use | |
4.1 The lists of components and materials are useful in enhancing the user's understanding of the technology and construction of fiber-optics cables and the development of performance standards for cables. 4.2 This guide is intended for use by all parties involved with fiber optics: materials suppliers, cable manufacturers, and end-users. |
|
1. Scope | |
1.1 This guide is intended to provide a list of materials commonly used in components that provide insulation, jacketing and strength in fiber-optic cables. Where these materials are covered by ASTM standards, an appropriate reference is made. Due to changing technology, not all materials being used are necessarily listed here. 1.2 This guide does not include materials used in components for optical purposes (optical fiber and its coating) or external metallic armoring (such as for a barrier to rodents). 1.3 This guide offers two general lists of materials: 1.3.1 A subdivision of fiber-optic cable construction into components that are used for insulation, jacketing, or strength, with a generic material classification for specific applications in each component (see Section 5); and 1.3.2 An alphabetical list of the generic material classifications, showing ASTM standards where they exist (see Material |
ASTM Specification |
Acrylates |
... |
Aramids: |
|
fibers |
D3317 |
tape |
... |
Fluoroplastics: |
|
ECTFE |
D3275 |
ETFE |
D3159 |
FEP |
D2116 |
PFA |
D3307 |
PTFE |
D1457 |
PVDF |
D3222 |
Glass fibers |
... |
Glass-fiber reinforced plastics |
... |
Grease and similar materials |
D4730, D4731, D4732 |
Nylon |
D4066 |
Polybutylene |
D4730, D4731, D4732 |
Polycarbonate |
D3935 |
Polyester tape |
D3664 |
Polyethylene |
D1248 |
Polyimide tape |
... |
Polypropylene |
D4101 |
Polyurethane |
... |
Poly(vinyl chloride) |
D2287 |
Rubber |
D4730, D4731, D4732 |
Silicone rubber |
D2526 |
Steel |
... |
Thermoplastic elastomer |
D4246 |
Thermoplastic polyester |
D4507 |
Standard Specification for FEP Resin Molding and Extrusion Materials |
|
Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
|
Standard Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable (Withdrawn 2006) |
|
Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
|
Standard Terminology Relating to Electrical Insulation |
|
Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
|
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 °C Operation |
|
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
|
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
|
Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment (Withdrawn 2022) |
|
Specification for High Modulus, Organix Yarn and Roving (Withdrawn 1986) |
|
Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
|
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
|
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
|
Specification for Thermoplastic Polyester (TPES) Materials (Withdrawn 1999) |
|
Standard Specification for Flooding Compounds for Telecommunications Wire and Cable |
|
Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
|
Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
Historical
1.1.2013
Historical
1.10.2008
Historical
1.5.2009
Historical
1.5.2010
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-04-23 (Number of items: 2 895 375)
© Copyright 2024 NORMSERVIS s.r.o.